• System Dimensions
- Height w/ 17 Gallon Drum: under 62"
- Footprint w/ Ext. Cartridge: 36" x 36" x 36"
- Inlet Diameter Full Welded 5 " w/ Neutral Vane
- Powder coated paint finish over heavy gauge steel

• Integral Fan Blower - Industrial Quality Motor
- US Made Premium Baldor 1.5hp Motor w/ Grease Fittings
- TEFC Motor, 1.15 Service Factor
- Insulation Class F
- Voltage: 1 Phase, 110-230v
- Amperage: 1 Phase, 16 / 8A  
- Composite / backward inclined / non-sparking, non-ferrous as required by NFPA fire code / dynamic, two-plane balanced to ISO 6.3 specifications. The same as aircraft turbine rotors.
- PLEASE NOTE: Oneida packages these units to work on 110V power and the motor is pre-wired for 110V with cord and switch. The motor is dual voltage and can operate at 220V but it would require alternate wiring, switch / starter and plug. Please contact Oneida for more information - 800-732-4065. Additional wiring fee will apply.

• Filter Media - ASHRAE Tested - Click for Filter Details
- High Efficiency Axtar Spun-Bonded Media
- Accredited, Independent Lab Tested
- Filter Media Captures 99.9% of Test Material from 0.2 - 2 microns @ 11 FPM
- Teflon-like coating to Facilitate Dust Cake Release

• Sound Level
- Extremely Quiet - 76dBA

• Dust Bin
- 17 Gallon Heavy Steel Drum

• Included
- 10' High Grade Industrial Super Flex Hose
- Stand Legs w/ Casters and Wire Drum Holder
- Magnetic Starter - w/ On-Off Switch Preset for Add-On Remote with Amperage Overload Protector (1 Phase)

• Options
- Remote Starter - Radio Frequency - $77.28 Upgrade
- True HEPA Filter Media - Captures 99.97% @ 0.3 microns - $129.00 Upgrade