Our server has detected that may be visiting this page from outside the United States
Please call us direct at 1-800-732-4065 to inquire on placing an order to your country, or see our growing list of International Resellers, as our website currently does not process international addresses.
For use with single-stage dust collectors and 6" piping, this cyclone eliminates filter clogging, suction loss, and messy dust bags by removing over 99% of fine dust and debris from the airstream, containing it in a customer supplied dust bin.
|Recommended Application:||Dust Collectors with 6" Ducting & Hoses|
|Inlet Size:||6-1/4" O.D. (6" I.D.)|
|Outlet Size:||6-1/4" O.D. (6" I.D.)|
|Overall Dimensions:||19"(W) × 18" (L) × 37-1/2"(H)|
|Approximate Weight:||8.5 lbs.|
|Lid Mounting:||Download Template|
Single-stage dust collectors are great for small, hobbyist shops but they come with a cost … fine dust quickly clogs the filter, reducing suction and leaving your tools as messy as ever! Worse still, there's nothing to protect your dust collector from being damaged should you accidentally suck up large wood chunks, bolts, etc.
How do you stop losing valuable time and money on maintenance and replacement parts? Install our cyclone!
Oneida Air Systems' patented Super Dust Deputy® XL cyclone separates over 99% of dust and debris from the incoming airstream, virtually eliminating filter clogging, suction loss, and significantly prolonging the lifespan of your filter.
Standard single-stage or bag-style dust collectors lose suction very quickly as the filter becomes clogged with fine dust. The cyclone uses centrifugal force to separate dust and debris from the incoming airstream, containing it safely away from the collector.
This frees up the dust collector to move as much air as physically possible without hindrance. That means less downtime for filter cleaning, continuously high suction, and significantly prolonged filter life.
If your shop has fixed piping that matches the diameter of your dust collector's intake, choose a cyclone that matches that as well. So 6" ducting connected to a dust collector with a 6" inlet should use our 6" XL cyclone. The same applies for 4" ducting runs and our new 4" Deluxe cyclone.
If your shop has piping that is smaller than your dust collector's inlet, such as 4" piping with a 6" inlet, then our 5" cyclone can be used to transition between them. You will need reducers to complete your setup (read below).
If you have industrial applications, such as collecting hot ash/soot or highly abrasive materials such as blasting powders, you should choose our Steel Super Dust Deputy.
Maybe, but a smaller cyclone would likely perform better and cost less. For 4" ducting runs we highly recommend our new Super Dust Deputy 4" Deluxe instead.
The exception would be if you plan to upgrade your shop in the near future with a larger dust collector and/or larger diameter ductwork.
In addition to the XL cyclone and your dust collector, you will need a reinforced, airtight container to mount it to, as well as flex hose or piping to connect it to your tools and dust collector. Any connections should be sealed using silicone caulk or HVAC foil tape. Shop Assembly Tools »
Review the cyclone's owner's manual for more detailed information.
The ports of our XL cyclone measures 6" on the inner diameter, allowing it to work seamlessly with the crimped steel pipe fittings common in most shops. If ordering a reducer from Oneida Air, you may specify in your order notes which ends you would like crimped, or you may purchase a crimping tool from us directly. Uncrimped steel ducting will not fit the XL cyclone's ports.
If you would like to connect hose directly to the XL cyclone, we recommend our 6" Hose Adapter Fitting paired with a hose clamp for quick and simple connections. Other non-standard solutions may include chilling the inlet, to contract the molded resin, or using flexible drain pipe couplings available at most hardware retailers. For more assistance please don't hesitate to contact us directly.
The XL cyclone can be used to retrofit nearly make or model dust collector with a 6" diameter intake. This inlet size is typical of 3HP to 5HP single stage dust collectors by manufacturers such as Delta, Harbor Freight, Grizzly, Jet, Powermatic, Shop Fox, etc., but horsepower isn't as important as the actual air volume moving through your ducting.
We recommend an operating airflow of at least 850 CFM for the XL cyclone to effectively separate 99% of debris from the airstream.
The shape and size of your container are completely up to you, so use whatever works best for your shop! A smaller container will need to be emptied more often, so most customers use at least a 35 gallon container with our XL cyclone. Shop Containers »
Any container you use must be:
Our Super Dust Deputy cyclone includes basic hardware and a foam gasket for mounting to your container's lid. We also offer a complete 17 gallon drum kit that can be readily used with any Super Dust Deputy cyclone.
If you are supplying your own container, we provide this free downloadable Lid Hole Template for our customers. If you are connecting your cyclone to the dust bin via flex hose, you may also need a 6" Angle Ring Flange.
Yes. All of our cyclone separators are intended for use with an air filter as they are only meant to remove the majority of dust and debris. Eliminating the filter entirely would allow small, harmful dust back into your shop's air.
We recommend that customers use our MERV 16± HEPA Filter Upgrade Kit as it provides the healthiest return air for your shop, as well as being easily serviceable thanks to its wide spaced pleating and non-stick membrane coating.
No. While some customers have found use for our cyclone in food related applications (e.g. farming, coffee roasting, etc.) it is not rated as food safe by the FDA.
Only $49.00 to ship anywhere within the continental USA. Additional shipping rates apply for Alaska, Hawaii, Puerto Rico, Canada, and all other countries.
Watch these video testimonials from our loyal fans and find out how our patented cyclone separator can revolutionize the way you work in your shop - eliminating suction loss, filter clogging, and messy dust bags!
Features of this product may be covered by one or more U.S. patents and/or trademarks registered by Oneida Air Systems Inc.
In the past Oneida Air Systems has worked with many major national leasing companies to help assist our customers mitigate the cost for their shop. To start your application first contact one of the companies listed below. Other lease programs also accepted on a case-by-case basis. Call 1-800-732-4065 for more information.
Oneida Air Systems is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information on our website or documentation, please notify us immediately at email@example.com.
Oneida Air reserves the right to limit quantities and correct prices when necessary.
We run new specials almost every week on a variety of dust collection systems and components. Subscribers get instant updates on the latest deals and promotions and can save anywhere from $25.00 to $300.00!