Our server has detected that may be visiting this page from outside the United States
Please call us direct at 1-800-732-4065 to inquire on placing an order to your country, or see our growing list of International Resellers, as our website currently does not process international addresses.
High static air pressure system for CNC, sanding, and other fine dust applications. Complete system includes heavy-gauge steel cyclone, U.S. Baldor motor, wide-pleated spunbond cartridge filter, plenum, stand, drum, and more.
Our 5HP High-Vacuum™ Dust Collector is one of our most powerful professional dust collection systems and is designed for small-medium sized shops running tools, such as CNC machines, where a high amount of pressure is needed to adequately collect airborne dust. The unique configuration of our High-Vacuum systems make full use of the high-efficiency U.S. motor and cyclone separator to deliver maximum static pressure to multiple tools simultaneously.
This system includes a FREE professional ductwork design service. Our team of dust collection experts will work with you directly to size your shop's ductwork and design a layout optimized for maximum performance!
This system is designed to collect dust from 1-2 tools at a time and is ideal for use with any type of CNC cutting tools as well as saws, jointers, lathes, shapers, planers, routers, sanders, and more!
Your collector should perform at peak efficiency at all times to ensure the health, safety, and quality of your work. That's why Oneida Air uses only the highest quality American-Made motors with our dust collection systems. Far superior than the cheap, foreign imported motors used by other manufacturers, our industrial-grade motors are built to last a lifetime, are designed to operate at peak efficiency within the system, and can be easily maintained at local U.S. service centers.
|Motor Type||5 HP TEFC C-Face Motor w/ Grease Fittings||Service Factor||1.00||Insulation||Class F|
|Manufacturer||Baldor||RPM||3,450||Full Load Efficiency||83%|
|Phase||Single (3-Phase model available)||Frequency||60Hz||Cord Length||10 ft|
|Safety Certification||UL Listed Motor||Magnetic Starter||Included with on/off switch and overload protector. (Additional stations available)||Remote Control||Not included. Can be purchased and installed into starter|
Oneida Air's fan blowers are designed for high-performance and low noise, operating at a low audio frequency to eliminate irritating high-pitched whining. The 5HP High-Vac's fan housing if fully welded from heavy-gauge steel (11 GA motor housing plate) to last through years and years of continuous usage.
To view an air performance curve for this system, click on the image to the right.
Rather than post misleading and inflated "Free-Fan CFM Ratings" as other manufacturers do, Oneida Air promotes "Actual CFM" ratings which reflect the operating performance of the fan blower once the filter, cyclone, and hose/ducting (10ft) are attached. This is to give you the best possible estimate for your dust collection performance. Free-Fan ratings (typically measured as the fan blower with nothing attached) are impossible to attain in any real-world application. We have provided both ratings below to help you make your own comparisons.
|Maximum Actual CFM||2,150 CFM at 2" Static Pressure||Free Fan Rating||3,225 CFM||Impeller Size||16.5" Diameter|
|Material||Cast Aluminum Alloy 356T-51 / Non-sparking & Non-ferrous as required by NFPA Fire Code||Construction||Single-piece - no rivets or welds
|Configuration||Dynamic, Two-Plane Balanced to ISO 6.3 Specs (the same as aircraft turbines rotors!)|
Every dust collection system by Oneida Air features a long-tapered cyclone design that provides maximum pre-separation efficiency – removing both fine sanding dust and bulk debris from the incoming air-stream before it ever reaches the fan blower. This not only protects the impeller from damaging debris, but also significantly reduces filter clogging and suction loss. Waste is contained in an easy-to-empty container beneath the cyclone, eliminating the need for emptying and replacing countless dust bags.
|Construction||Solid-Welded 16 Gauge Galvanized Steel||Shape||23" Dia. Long-Tapered Design||Finish||Rust-Preventative White Powder Coat|
|Cyclone Inlet||8" Round Neutral Vane (Solid-Welded)||Inlet Height Off Ground||Approx. 80" to center||Fan Blower Outlet||7.64" (I.D.) x 10.031" (I.D.)|
|Bottom Discharge||10" Diameter|
Oneida Air's dust collection systems only use filters that are specially designed for dust collection with low pressure drop and fast dust release for easy maintenance. Our filters are highly efficient, built to last, easy to install, and best of all - Made in America!
|Filter Type||100% Spunbond Polyester (HEPA upgrade available - call for info)||Additional Documentation||Izumi Axtar Media Spec Sheet|
|Filtration Efficiency (at 11 FPM)||99.9% of particles captured 0.2 - 2 micron in size||ASHRAE Tested||Learn More|
|Total Filtration Area||155 sq ft||Dimensions||18" x 58.5" (combined)|
|Pleat Arrangement||Wide-Spaced||Pleat Coating||"Teflon-like" PTFE membrane|
|Lifespan||5–7 years based on typical usage||Item #||FCK186200|
With its compact footprint, the 5HP High-Vac can be configured to work easily into most ductwork setups. Designed for larger shops running multiple tools, this system can also be outfitted with different support systems and dust container configurations (e.g. splitter kit, hoppers, airlocks, etc.). Call us at 1-800-732-4065 and our team of dust collection experts will help you customize your system.
|System Type||Stationary||System Support||Angle Iron Stand||Drum Configuration||Single (for other options call 1-800-732-4065)|
|Stand Width||28"||Stand Depth||28"||Stand Height||68"|
|Total System Width||56"||Total System Height||108"||Total Footprint||56" x 28"|
The cyclone pre-separates bulk debris and fine dust into the reinforced 55 gallon steel drum included with the system, allowing for easy waste disposal. Oneida offers several optional components that can simplify your workflow even further (see below).
|Capacity||55 Gallons / 208.2L
(Call for dual-drum and hopper options)
|Bag Usage||Requires Drum Liner Bag Holder Kit|
|Type||Reinforced Galvanized Steel Drum (Call for alternatives)||Coating||Exterior Powder-Coat Finish|
|Inlet||Collared 10" inlet for flex hose connections (included)||Lid||Steel lid with locking-lever clamp|
Additional shipping rates apply for Alaska, Hawaii, Puerto Rico, Canada, and all other countries outside the U.S.A.
Features of this product may be covered by one or more U.S. patents and/or trademarks registered by Oneida Air Systems Inc.
In the past Oneida Air Systems has worked with many major national leasing companies to help assist our customers mitigate the cost for their shop. To start your application first contact one of the companies listed below. Other lease programs also accepted on a case-by-case basis. Call 1-800-732-4065 for more information.
Oneida Air Systems is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information on our website or documentation, please notify us immediately at email@example.com.
Oneida Air reserves the right to limit quantities and correct prices when necessary.
We run new specials almost every week on a variety of dust collection systems and components. Subscribers get instant updates on the latest deals and promotions and can save anywhere from $25.00 to $300.00!