Our server has detected that may be visiting this page from outside the United States
Please call us direct at 1-800-732-4065 to inquire on placing an order to your country, or see our growing list of International Resellers, as our website currently does not process international addresses.
Our 7.5HP Direct Drive is the workhorse of our industrial line of cyclonic dust collection systems - delivering maximum airflow performance within a compact, quiet, and cost-effective package. Built to last a lifetime using industrial, heavy-gauge steel components, our 7.5HP is ideal for shops with fixed ductwork where 3 or more tools are in use simultaneously.
Your collector should perform at peak efficiency at all times to ensure the health, safety, and quality of your shop and the workers within it. That's why Oneida Air uses only the highest quality US-Made motors with our dust collection systems.
Far more reliable than the cheap, foreign imported motors used by other manufacturers, our industrial-grade motors are built to last a lifetime, are designed to operate at peak efficiency within the system, and can be easily maintained or taken to local U.S. service centers.
|RPM||3,450 RPM||Full Load Efficiency||87.5%|
|Type||TEFC, C-Face||Insulation||Class F|
|Grease Fittings||Yes||Service Factor||1.0|
|Voltage||208V – 230V
(Call for 460V – 480V)
|Amperage||19A – 17.2A
(8.6A with 460V – 480V)
|Safety Certification||UL Listed Motor||Frequency||60Hz|
|Magnetic Starter||Included with on/off switch and overload protector. (Additional stations available)||Remote Control||Sold Separately|
Oneida Air's fan blowers are designed for high-performance and low noise, operating at a low audio frequency to eliminate irritating high-pitched whining. The 7.5HP Direct Drive's fan housing is fully welded from heavy-gauge steel (11 GA motor plate) to endure years and years of continuous usage.
To view an air performance curve for this system, click on the image to the right.
Rather than post misleading and inflated "Free-Fan CFM Ratings" as other manufacturers do, Oneida Air promotes "Actual CFM" ratings which reflect the operating performance of the fan blower once the filter, cyclone, and hose/ducting (10ft) are attached. This is to give you the best possible estimate for your dust collection performance. Free-Fan ratings (typically measured as the fan blower with nothing attached) are impossible to attain in any real-world application. We have provided both ratings below to help you make your own comparisons.
|Maximum Actual CFM||2,514 CFM at 1.5" S.P.||Free Fan Rating||4,080 CFM||Noise Level||83 dBA† at 10 ft||Blower Outlet||7.5" x 10" I.D. (12" O.D. w/ Included Adapter)|
|Impeller||Cast Aluminum Alloy 380 / Non-sparking & Non-ferrous as required by NFPA Fire Code||Construction||Single-piece - no rivets or welds. Backward Inclined
Dynamic, Two-Plane Balanced to ISO 6.3 Specs (the same as aircraft turbines rotors!)
† Weighted for loudness perceived by the human ear. Measured with standard silencer and filter attached.
Every dust collection system by Oneida Air features a long-tapered cyclone design that provides maximum pre-separation efficiency – removing both fine sanding dust and bulk debris from the incoming air-stream before it ever reaches the fan blower.
|Construction||Solid-Welded 16 Gauge Galvanized Steel||Finish||Rust-Preventative White Powder Coat|
|Inlet Size||10" Dia.||Inlet Type||Neutral Vane|
|Bottom Discharge||10" Dia.||Rotary Airlocks||Sold separately|
Specifically designed for dust collection applications, this optional Filter & Plenum Kit (Item # FXK020007) should be used in any shop that does not have the option of venting the exhaust air outside. This kit features large, modular, spunbond cartridge filters engineered for low-pressure drop, simple maintenance, and fast installations. Best of all, just like our systems these filters are proudly made in the USA!
|Filter Type||100% Spunbond Polyester (HEPA upgrade available - call for info)||Total Filtration Area||310 sq ft|
|Filtration Efficiency (at 11 FPM)||99.9% at 0.2 - 2 microns||ASHRAE Tested||Learn More|
|Pleat Coating||"Teflon-like" PTFE membrane||Pleat Spacing||Wide-Spaced|
|Item #||FCK186200||Documentation||Izumi Axtar Media Spec Sheet|
With its compact footprint, the 7.5HP Direct Drive can be adapted into almost any ductwork & shop layout. Designed for larger shops running multiple tools, this system can outfitted with different support systems and dust container configurations (e.g. splitter kit, hoppers, airlocks, etc.).
See the system's Owner's Manual for detailed dimensions or call us toll-free at 1-800-732-4065 for more details.
|System Type||Stationary||System Support||Angle Iron Stand|
|Footprint||80.3" x 39.2" (w/ single drum stand and filter plenum kit)||Height||130" (w/ single drum stand)|
This system's high-efficiency cyclone separator removes bulk debris and fine dust from the incoming airstream, collecting it in a container beneath the cyclone. This allows for continuously high air suction and simple waste disposal.
Oneida offers several waste container options, including 55 gallon drums, 110 gallon dual-drum kits, and industrial feed hoppers. Customers can also supply their own open container when using one of our Motorized Rotary Air Lock Valves.
|55 Gallon Drum Kit||Item #SEK551001||1-2 Cu. Yd. Feed Hoppers||Call for pricing and details.|
|110 Gallon Dual Drum Kit||Item #SEK551010
(requires dual-drum stand #STZ070002)
|10" Rotary Air Lock Valve||Item #SAZ100000
Call for pricing and details.
Call for more info or to setup an appointment.
Features of this product may be covered by one or more U.S. patents and/or trademarks registered by Oneida Air Systems Inc.
In the past Oneida Air Systems has worked with many major national leasing companies to help assist our customers mitigate the cost for their shop. To start your application first contact one of the companies listed below. Other lease programs also accepted on a case-by-case basis. Call 1-800-732-4065 for more information.
Oneida Air Systems is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information on our website or documentation, please notify us immediately at firstname.lastname@example.org.
Oneida Air reserves the right to limit quantities and correct prices when necessary.
We run new specials almost every week on a variety of dust collection systems and components. Subscribers get instant updates on the latest deals and promotions and can save anywhere from $25.00 to $300.00!