Our server has detected that may be visiting this page from outside the United States
Please call us direct at 1-800-732-4065 to inquire on placing an order to your country, or see our growing list of International Resellers, as our website currently does not process international addresses.
Quiet, powerful, and compact design for shops both large and small. Includes True-HEPA media filtration, industrial U.S. motor, and cyclonic pre-separator. Comes standard with angle-frame stand and 35 gal. fiber drum. Custom options available.
A continuation of our award-winning V-Series dust collectors, the new Molded V-System is more streamlined and more powerful than ever! The V-Series' molded static conductive resin construction speeds up and simplifies system assembly, maximizes airflow performance, and significantly reduces noise levels.
This system is designed to collect dust from 1 tool at a time (more if blast gates are used) and is ideal for use in small 1-2 man shops operating tools such as lathes, planers, radial/miter saws, and more!
Your collector should perform at peak efficiency at all times to ensure the health, safety, and quality of your work. That's why Oneida Air uses only the highest quality American-Made motors with our dust collection systems. Far superior than the cheap, foreign imported motors used by other manufacturers, our industrial-grade motors are built to last a lifetime, are designed to operate at peak efficiency within the system, and can be easily maintained at local U.S. service centers.
|Motor Size||2 HP
(1.5HP, 3HP, and 5HP also available)
|Manufacturer||Baldor U.S.A.||Motor Type||TEFC C-Face Motor|
|Grease Fittings||Yes||Service Factor||1.15||Insulation||Class F|
|Safety Certification||UL Listed Motor||Magnetic Starter||Included with on/off switch and overload protector. (Additional stations available)||Remote Control||Not included. Can be purchased and installed into starter|
Oneida Air's fan blowers are designed for high-performance and low noise, operating at a low audio frequency to eliminate irritating high-pitched whining. The V-System's fan housing is single-piece molded from a lightweight industrial resin to provide maximum airflow with minimal air resistance/turbulence.
To view an air performance curve for this system, click on the image to the right.
Rather than post misleading and inflated "Free-Fan CFM Ratings" as other manufacturers do, Oneida Air promotes "Actual CFM" ratings which reflect the operating performance of the fan blower once the filter, cyclone, and hose/ducting (10ft) are attached. This is to give you the best possible estimate for your dust collection performance. Free-Fan ratings (typically measured as the fan blower with nothing attached) are impossible to attain in any real-world application. We have provided both rating below to help you make your own comparisons.
|Maximum Actual CFM||1,190 ACFM at 1.8" Static Pressure||Impeller Size||13-7/8" Diameter||Build Construction||Single-piece / Backward Inclined|
|Material Type||Cast Aluminum Alloy 356-51
||Balancing||Two-plane Balanced to ISO 6.3 Specs
The same as Aircraft Turbine Rotors!
|Safety||Non-sparking & Non-ferrous as required by NFPA Fire Code|
The Molded V-Series features an ultra-high efficiency cyclone which pre-separates over 99% of fine dust and bulk debris. It's patented long-tapered shape is optimized for minimum static pressure loss and maximum particle separation. Waste is collected in the container below the cyclone, virtually eliminating filter clogging while protecting your impeller from larger debris (e.g. nuts, bolts, gravel, wood chips, etc.).
Oneida Air's systems use hospital-grade True-HEPA Media cartridge filters specifically engineered for dust collection. They are specially designed for low pressure drop and fast dust release for easy maintenance. Unlike other cartridge filters on the market, our filters work at peak efficiency right out of the box, require zero pre-loading, and are easily serviceable.
|Filter Type||G.E. Certified H-12 HEPA Media||Additional Documentation||Call for info|
|Filtration Efficiency||99.97% of particles captured down to 0.3 micron in size||ASHRAE Testing||MERV Rating 16± (Learn More)|
|Total Filtration Area||95 sq ft||Dimensions||13" x 36"|
|Pleat Arrangement||Wide-Spaced||Pleat Coating||"Teflon-like" PTFE membrane|
|Lifespan||5–7 years based on typical usage||Item #||FCS133695HF|
This V-Series dust collection system comes standard with a 35 gallon drum and stand option. The stationary 4-legged galvanized steel frame features a low overall footprint and rubber non-marking feet so it won't scuff your floors. Oneida Air has specifically engineered this stand to fit comfortably underneath typical 8ft ceiling heights, making it perfect for garage or basement shops!
|System Type||Stationary||System Support||Galvanized Steel Angle Frame Stand||Wall Mount||Not included. Call for this option|
|Stand Width||27"||Stand Depth||27"||Stand Height||54"|
|Total System Width||47"||Total System Height||88"||Total Footprint||47" x 32.5"|
The V-System's molded cyclone separator body removes over 99% of bulk debris and fine dust from the incoming airstream, depositing it into the lightweight 35 gallon fiber drum included with the system, allowing for fast and easy waste disposal. Oneida offers several optional components that can simplify your workflow even further (see below)
|Capacity||35 Gallons / 132.5L
(Call for larger option)
|Bag Usage||Requires Drum Liner Bag Holder Kit|
|Type||Lightweight Fiberboard Drum (Call for steel option)||Waterproof||No|
|Inlet||Collared 7" inlet for flex hose connections (included hose & clamps)||Lid||Steel lid with locking-lever clamp|
East Coast: $99 | West Coast: $199
Additional shipping rates apply for Alaska, Hawaii, Puerto Rico, Canada, and all other countries outside the U.S.A.
Features of this product may be covered by one or more U.S. patents and/or trademarks registered by Oneida Air Systems Inc.
In the past Oneida Air Systems has worked with many major national leasing companies to help assist our customers mitigate the cost for their shop. To start your application first contact one of the companies listed below. Other lease programs also accepted on a case-by-case basis. Call 1-800-732-4065 for more information.
Oneida Air Systems is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information on our website or documentation, please notify us immediately at email@example.com.
Oneida Air reserves the right to limit quantities and correct prices when necessary.
We run new specials almost every week on a variety of dust collection systems and components. Subscribers get instant updates on the latest deals and promotions and can save anywhere from $25.00 to $300.00!