Our server has detected that may be visiting this page from outside the United States
Please call us direct at 1-800-732-4065 to inquire on placing an order to your country, or see our growing list of International Resellers, as our website currently does not process international addresses.
Upgrade your 1-3HP dust collector by capturing over 99% of airborne dust and debris, virtually eliminating filter clogging and suction loss while protecting your fan impeller. Compact, lightweight design molded from an industrial static conductive resin.
Regarding Reducers: Please read the section below concerning using reducers on the inlet/outlet of the cyclone.
Single stage dust collectors lose suction very quickly as the filter becomes clogged with dust. Using a cyclone separator like the Super Dust Deputy in conjunction with your collector will separate over 99% of dust from the air stream prior to reaching the filter. This prevents your vacuum's filter from clogging, allowing you to work safer and longer while saving you valuable time and money on replacement filters and bags! This also serves to protect your collector's motor and impeller from debris such as large wood chunks and shop debris (e.g. nuts, bolts, etc.).
|Optimal Application:||Retrofits to 1 - 3HP Dust Collectors|
|Recommended Operating CFM Range:||350 - 850 CFM|
|Inlet Diameter:||5" Inlet|
|Outlet Diameter:||6" Outlet|
|Cyclone Width:||17" × 15"|
The Super Dust Deputy cyclone (both regular and XL sizes) is now available at your local Menards, and Woodcraft stores across the country! Shop their online stores or arrange for an in-store pickup to save on your next order! Contact retailer for more details and current inventory.
Please note that your reducers will need to be crimped on the ends fitting into the cyclone's inlet and outlet. The exception to this is the inlet of the Regular Size Super Dust Deputy®. A 5-4" Reducer will fit over the inlet of the regular-size Super Dust Deputy® if not crimped. Oneida Air sells a specially designed reducer for this exact application - SDD Reducer #DRL001205
Please specify in your Order Notes which end of the reducer you want crimped or call 1-800-732-4065 with any questions.
Features of this product may be covered by one or more U.S. patents and/or trademarks registered by Oneida Air Systems Inc.
In the past Oneida Air Systems has worked with many major national leasing companies to help assist our customers mitigate the cost for their shop. To start your application first contact one of the companies listed below. Other lease programs also accepted on a case-by-case basis. Call 1-800-732-4065 for more information.
Oneida Air Systems is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information on our website or documentation, please notify us immediately at firstname.lastname@example.org.
Oneida Air reserves the right to limit quantities and correct prices when necessary.
We run new specials almost every week on a variety of dust collection systems and components. Subscribers get instant updates on the latest deals and promotions and can save anywhere from $25.00 to $300.00!