Large cyclone separators for high CFM applications. Rotationally molded from static conductive resin.
Regarding Reducers: Please read the section below concerning using reducers on the inlet/outlet of the cyclone.
Single stage dust collectors lose suction very quickly as the filter becomes clogged with dust. Using a cyclone separator like the Super Dust Deputy® in conjunction with your collector will separate over 99% of dust from the air stream prior to reaching the filter. This prevents your vacuum's filter from clogging, allowing you to work safer and longer while saving you valuable time and money on replacement filters and bags!
Extra-Large (XL) Size
|Optimal Application:||Retrofits to 1-3hp Dust Collectors||Retrofits to 3-5hp Dust Collectors|
|Recommended CFM Range:||350 - 850 CFM||850 - 1,200 CFM|
|Inlet Diameter:||5" Inlet||6" Inlet|
|Outlet Diameter:||6" Outlet||6" Outlet|
|Cyclone Width:||17" × 15"||19.1" × 17.9"|
|Weight:||5.40 lbs.||8.45 lbs.|
Due to the larger size of the Super Dust Deptuy® XL it is recommended that you use some sort of additional support to stabilize the unit. OAS offers an Optional Angle Brace Kit for only $19.00 that mounts easily to your cyclone and drum.
Please note that your reducers will need to be crimped on the ends fitting into the cyclone's inlet and outlet. The exception to this is the inlet of the regular Super Dust Deputy®. A 5-4" Reducer will fit over the inlet of the regular-size Super Dust Deputy® if not crimped. Oneida Air sells a specially designed reducer for this exact application - SDD Reducer #DRL001205
Please specify in your Order Notes which end of the reducer you want crimped or call 1-800-732-4065 with any questions.
Drawing not to scale. For illustration purposes only.
Regular Size S.D.D. - $34.00
XL Size S.D.D. - $44.00
We run new specials almost every week on a variety of dust collection systems and components. Subscribers get instant updates on the latest deals and promotions and can save anywhere from $25.00 to $300.00!
» No thanks, I'm not interested