Actual appearance may vary to that shown above.

10HP Direct Drive Cyclone Dust Collector

Dust control solution for commercial shops collecting dust from multiple tools at once. Includes heavy-gauge steel cyclone separator, U.S. made Baldor motor, filter efficiency gauge, DIY Ductwork Design Guide, and more. Custom choice of various mounting stands, waste disposal options, and filtration units.

In stock

SKU
XXK100300

As low as $7,700.00

This Items Ships Freight Via Common Carrier

Due its large size and weight, this product must be freight shipped and will require custom billing. Contact us prior to ordering for a free quote; Our service department will contact you after your order is booked for additional freight fees. Review our shipping policy for more information.

Customize 10HP Direct Drive Cyclone Dust Collector
Industrial Tri-Filter Hanging Plenum Assembly   + $2,434.00

* Required

Your Customization
10HP Direct Drive Cyclone Dust Collector (#XXK100300)
10HP Direct Drive Cyclone Dust Collector

In stock

$7,700.00

Summary

    Kit Modification: If you need further customization of your system (e.g. mounting options, waste container upgrades, different filtration, etc.) contact us directly and one of our representatives will work with you to build the system that best meets your shop's needs.

    Realize the Power of American Manufacturing

    Our 10HP Direct Drive system provides powerful airflow within a compact, quiet, and cost-effective package. With its high-efficiency cyclone separator you can expect continuously high suction performance and minimal filter maintenance.

    Made in the USA with long lasting heavy-gauge steel components, our 10HP is ideal for fixed ductwork where 3-5 tools are in use simultaneously. With it's typical operating range delivering 3"-11" of static pressure (see fan curve) this system is particularly suited for CNC equipment requiring multiple open ports as well as other high pressure applications.

    Included Features & Components

    • Industrial 10HP U.S. Made Baldor® Motor
    • Integral Fan Blower with Carbon Steel Impeller
    • Magnetic Starter w/ Overload Protector
    • Heavy-Gauge Solid Welded Steel Cyclone Separator
    • High-Efficiency Modular Cartridge Filters
    • Real-time Filter Efficiency Gauge
    • Internal Foam Silencer
    • Robust Angle Iron Frame Stand
    • 55 Gallon Reinforced Steel Dust Bin (single or dual)
    • D.I.Y. Ductwork Design Guide
    • 2 Year Limited Warranty
    10HP Direct Drive Diagram
    10HP Direct Drive System shown with stand, single dust bin, and triple stacking filter plenum kit.


    7.5HP Direct Drive System Fan Performance Curve
    OAS uses Actual CFM Ratings that reflect real-world airflow performance.

    Continuously High Airflow Performance

    Your dust collector should perform at peak efficiency at all times to ensure the health, safety, and quality of your work. That's why Oneida Air Systems uses only the highest quality motors with our dust collection systems. Far superior than the cheap, foreign imported motors used by other manufacturers, our industrial-grade motors are built to last a lifetime.

    • High-efficiency, Baldor® fan blower motor - Made in USA.
    • Industrial-grade brushless motor designed for continuous duty.
    • Wired for three phase power for commercial applications.
    • Includes grease fittings for easy maintenance or taken to local U.S. service centers.
    • Delivers up to 3,800 Actual CFM at 2.3" S.P. - ample airflow for multiple woodworking tools at once.
    • Low pitch noise level provides ideal operator comfort
    • System's inlet and outlet rotate independently at 45 degree increments to suit your shop's needs.
    • Heavy-gauge steel fan housing, full seam welded, built to last a lifetime.
    Closeup of Direct Drive cyclone
    Clean-out cones and expansion chambers available - call for details.

    Ultra-High Efficiency Steel Cyclone Separator

    Features Oneida Air Systems' unique long-tapered cyclone design that provides maximum pre-separation efficiency compared to the squatter cyclone designs of competitors.

    • Virtually eliminates filter clogging and suction loss to provide continuous suction performance.
    • Significantly extends the lifespan of the filter and reduces downtime needed for cleaning.
    • Rectangular, neutral-vane inlet with 12" dia. square to round adapter
    • Industrial 16 gauge steel construction with full welded, airtight seams.
    • Durable, rust preventative, almond-white powder coat finish.
    Triple Cartridge Filter Plenum Kit
    Higher filtration efficiency units available by phone order only.

    High Quality & Serviceable Filtration

    Our industrial Direct Drive systems use spunbond polyester cartridge filters that are specifically designed for dust collection applications - providing unbeatable airflow and filtration performance - and are proudly made in the USA!

    • OAS fully stands by the quality and performance of our filters; each filter is sent to an accredited independent testing lab. Contact us for more information and documentation.
    • Wide-spaced pleating and non-stick PTFE membrane coating facilitates quick and easy maintenance.
    • Patented filter stacking system provides the filtration area of a single larger filter, but without the cumbersome weight and install, and provides additional savings when replacements are required.
    • Patented internal acoustic foam reduces noise caused by vibrating outgoing air by 1–2 dBa
    • Fine dust pan captures residual dust that falls off the inside of the filter. Can be removed easily for cleaning after reverse blowing compressed air into the pleats.
    • Includes Filter Efficiency Performance Gauge that takes the guesswork out of filter maintenance

    Configurable Mounting Systems

    Whether your system is connected to just a few saws, drum sanders, or industrial CNC equipment, Oneida Air Systems recognizes that the amount of waste produced by shops can vary significantly; We offer a wide variety of waste handling accessories to suit the needs of any work environment.

    Specifications
    Horsepower10HP
    Motor TypeU.S. Baldor® TEFC Motor
    Motor Service Factor1.15
    Voltage208-230V, 460V
    Recommended Breaker SizeCall for Info
    Amperage (Typical)26.2-23.8A (11.9A @ 460V)
    Phase (Pre-Wired)3-Phase
    Frequency60Hz
    Power ConnectorWire
    Impeller TypeBackward inclined, welded carbon steel.
    Impeller Size17" Dia.
    Real CFM Rating3,800 Actual CFM at 2.3" S.P.
    Noise Level84-85 dBA @ 10 ft
    Filter Media TypeIzumi Axtar Spunbond
    Filtration Efficiency99.9% @ 0.2-2.0 microns
    MERV RatingMERV 13 ±
    Total Filtration Area465 sq ft
    Waste Capacity55 Gallon, 110 Gallon, 1 Cubic Yard, 1.5 Cubic Yards, 2 Cubic Yards
    Remote ControlSold Separately
    Primary Build MaterialsCold Rolled Steel
    WeldingSeam Welded
    Static Resistance RatingConductive (Metal)
    ColorWhite
    ContentsBlower Motor Assembly, Magnetic Starter, Fan Housing, Cyclone Separator, Hardware
    Country of ManufactureUnited States
    Warranty Information2 Year Limited Warranty
    CertificationsComplete system is cETLus certified for indoor use
    Applicable Patents#7,247,180, #9,370,740
    Inlet SizeRound: 12" Dia.
    Square ID: 8"(W) x 14"(H)
    Square OD: 10-1/2"(W) x 16-1/2"(H)
    Outlet SizeSquare ID: 12-1/2"(W) x 10"(H)
    Discharge Size10" Dia.
    Height to Center of Inlet103.25"
    Write Your Own Review
    You're reviewing:10HP Direct Drive Cyclone Dust Collector
    Your Rating
    Frequently Asked Questions
    Can I vent my system outside?

    If you have conditioned air in your shop, (Heat or cool) then exhausting outside can be costly. If your building is small and well-sealed, you can interfere with flue exhausts as well. Close neighbors might object. If the Dust Collection system is run intermittently it is generally not a problem. Most buildings have enough leaks and crevices where the aforementioned volume of air does not cause problems. If you have a problem opening or closing an outside door when the DC is running, crack a window slightly. The rule of thumb is for every 500 CFM have at least 1 sq/ft of return air coming back into the shop. A lot of our customers blow exhaust air outside successfully.

    Can this be used for wet applications as well?

    No. This system is designed for use collecting dry materials only.

    Is this product compatible with Quick-Clamp Duct?

    Yes but you will need to install a Machine Adapter into the inlet first. These adapters are smaller on the raw end than traditional ducting so that they can slip into the ports on systems and tools i.e. a 5" Quick-Clamp Duct Machine Adapter will measure ~4.9" O.D. on the raw end.

    My filter gauge is reading 3 and I just installed it onto a new filter? Why is that?

    The actual number doesn't really matter. It will be higher when you have more gates open, more airflow through the system and thus more back-pressure on the filter What we really care about is the change in the number. So, take a baseline reading (or set of readings) and monitor them. When the filter gets dirty the pressure and gauge reading will go up. When the reading changes say 1-2" on the gauge that's a good indicator of when you'd want to clean. None of this is exact science but rather an indication of pressure buildup in the filter. Also, cleaning it more often (when the buildup is lower) will normally be easier and quicker than waiting for the filter to be dirtier.

    What dust can be collected with your collector?

    Oneida Air Systems' dust collectors are designed and tested for wood and wood dust. They can and have been be used effectively for various other dusts and chips such as drywall dust, paper dust, agricultural dust, metal chips and other forms of debris. The customer is however, cautioned that some common materials when cut, ground or processed by machinery may become very dangerous: highly toxic, flammable, or deflagrable and explosive and they should therefore ensure that you use your particular use of a dust collection system in accordance to national, state, local, NFPA, OSHA and all other applicable codes.

    Did you find what you were looking for?

    Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.