110V Remote Control Repair Kit
Restore Your Dust Collection System's Remote Starter
This kit can be used to repair your dust collector's remote starter - necessary for damaged items or products out of warranty. A licensed electrician is required for wiring the new receiver unit into the system's 110V magnetic starter. Repair kit includes a new wireless keyfob unit - receivers are not sold separately and can only be purchased in this kit.
Remote Control Troubleshooting Guide:
Is your Remote Control not turning your system on or off? If you purchased your system after 2006, please check the following steps in the order they are presented:
- Make sure the power cord is firmly plugged into the outlet.
- Make sure your remotes batteries are charged and installed correctly.
- Check to confirm that the magnetic starter works when used manually.
- Check the electrical contacts in both the remote control unit and the receiver to ensure that they are clean, well connected, and that there are no obstructions. Please Note: Disconnect the unit before checking any electrical connections.
If you have reviewed the information above and find that you are still having problems with your receiver getting signal from your remote control, we recommend that you order a repair kit for your system. We recommend when connecting a new receiver that you replace one wire at a time. If you need assistance with your installation please contact a licensed electrician. For any further questions or concerns please contact Customer Service at 1-866-387-8822.
|Primary Build Materials||ABS Plastic|
|Contents||1x Receiver, 1x Remote Keyfob|
|Warranty Information||90 Day Limited Warranty|
All of our current remote control products operate via Radio Frequency (RF).