Actual appearance may vary to that shown above.

13" x 13" C-Rated Spunbond Cartridge Filter

Replacement filter for older Dual Portable and Mini Gorilla dust collectors. Engineered for low pressure drop using durable Izumi Axtar spunbond media; 3rd-party tested for filtration efficiency. Features wide-spaced pleating with non-stick coating for quick & easy cleaning.

Efficient Air Filtration for Your Dust Collector

This industrial-grade cartridge filter is excellent for small, flour-sized dust particles such as wood dust. One cartridge can replace the role of multiple filter dust bags and won't clog up after a few cleaning cycles. Can be easily cleaned from the outside by blowing compressed air into the pleats of the unit.

  • Specially designed for high airflow performance with minimal pressure drop
  • Wide-spaced pleating and non-stick coating faciltates quick dust release for cleaning
  • Durable polyester pleating material with external, reinforcing steel wire frame
  • Independently lab tested and verified filtration media

System Compatibility Chart

Description Item #
Dual Portable Dust Collector #XXP020100, #XXP030100, #XXP020100H, #XXP030100H
Mini Gorilla #XXP010100, #XXP010100H, #XXP010100H220, #XXP010101, #XXP010101H,

Not compatible with newer, molded resin Mini Gorilla's

Horsepower Rating1.5HP
Filter Media TypeIzumi Axtar Spunbond
Filtration Efficiency99.9% @ 0.2-2.0 microns
MERV RatingMERV 13 ±
Filter End TypeHole Top
Total Filtration Area40 sq ft
ReinforcementExternal Wire Cage
Primary Build MaterialsGalvanized Steel, Polyester
Inner Diameter8.25"
Outer Diameter13"
Country of ManufactureUnited States
Similar Products
Write Your Own Review
You're reviewing:13" x 13" C-Rated Spunbond Cartridge Filter
Your Rating
Frequently Asked Questions
How do I clean this filter?

Clean this filter using compressed air blown from the outside of the filter. The nozzle should be angled roughly 20° and pointed into the filter's pleating. Keep the air nozzle at least 6" away from the filter to prevent damage to the filter media. We do not recommend using water to clean this filter.This cartridge filter has a pleating arrangement that is widely spaced for significantly faster and easier cleanings compared to competitive models. Additionally, the filter media is coated with a non-stick PTFE membrane that allows for quick dust release when cleaning.

How often should I clean the filter?

This can vary widely depending on how often your dust collector is used, and what kind of dusts it's exposed to. You should typically clean it only once you've noticed a considerable drop in suction performance. In our experience this can be around 1x per year, but with heavy amounts of sanding it could be as often as 1x per month. A pressure meter such as our Filter Efficiency Gauge can also be used to monitor pressure buildup.

When should I replace this filter?

With regular maintenance, our cartridge filters can easily last up to 5 years. Your filter should only be replaced if thorough cleanings do not help to restore your suction performance.

Did you find what you were looking for?

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.