13" x 39" C-Rated Spunbond Cartridge Filter
|Horsepower Rating||1.5HP - 3HP|
|Filter Media Type||Izumi Axtar Spunbond|
|Filtration Efficiency||99.9% @ 0.2-2.0 microns|
|MERV Rating||MERV 13 ±|
|Filter End Type||Double Open Ended|
|Total Filtration Area||95 sq ft|
|Reinforcement||External Wire Cage|
|Primary Build Materials||Galvanized Steel, Polyester|
|Country of Manufacture||United States|
This can vary widely depending on how often your dust collector is used, and what kind of dusts it's exposed to. You should typically clean it only once you've noticed a considerable drop in suction performance. In our experience this can be around 1x...
Clean this filter using compressed air blown from the outside of the filter. The nozzle should be angled roughly 20° and pointed into the filter's pleating. Keep the air nozzle at least 6" away from the filter to prevent damage to the filter media...
With regular maintenance, our cartridge filters can easily last up to 5 years. Your filter should only be replaced if thorough cleanings do not help to restore your suction performance.