13" Stacking Sound Filter
|Primary Build Materials||Galvanized Steel|
|Contents||Sound Filter, Stacking Clips|
|Country of Manufacture||United States|
|Applicable Patents||U.S. Patent #9,370,740|
This product is designed for use with Oneida Air dust collectors with an external 13" dia. cartridge filter that is attached via J-Bolts to the plenum elbow; this includes all V-Systems (1.5HP to 5HP) manufactured after 2012. If your system has a filter that is secured to the plenum via a threaded rod running through the center of the filter stack, you will need to purchase an additional 14" threaded rod length and a coupler (available at any local hardware store) to provide enough room to attach the Stacking Sound Filter.
Yes; If you have room underneath the filter assembly (varies by model) then you can stack multiple sound filters, however, the resulting noise reduction per filter is not linear (additive) and is subject to diminishing returns. For example: 1 Sound Filter = 6-7 dBA total reduction 2 Sound Filters = ~9 dBA total reduction 3 Sound Filters = ~10 dBA total reduction 4+ Sound Filters = ~10 dBA total reduction
Both the Stacking Sound Filter and the Exhaust Silencer offer similar performance in terms of noise reduction, but exhaust silencers must be installed into the plenum assembly and will increase the overall footprint of the system by 12" to 36" and will require additional components (hangers, square to rounds, etc.). Exhaust Silencers are intended for installation into long transitional ducting such as when the filter is located far from the collector - typical of industrial systems such as the Direct Drive. Comparatively, the Stacking Sound Filters can be installed quickly and easily, requiring no additional components.
Yes, the smaller 13" Stacking Sound filter will work with your older system, but you will need a small amount of extra hardware to install it. The filters on older 2HP Super Dust Gorillas had a threaded rod running down inside the filters, with a plate at the bottom that the filters rested on. You will need to extend this threaded rod by 14" by purchasing an additional length and a rod coupler from your local hardware store.