Actual appearance may vary to that shown above.

Industrial Quad-Filter Hanging Plenum Assembly

High-efficiency exhaust air filtration assembly for use with 15HP-20HP systems. Includes modular stacking spunbond filters and mounting hardware for attaching to the system's support structure.
Includes four high-efficiency spunbond media filters, heavy-duty steel plenum box, fine filter dust pans, internal filter silencers, and realtime filter efficiency gauge. For use with system #XXK150300.
Horsepower Rating15HP - 20HP
Filter Media TypeIzumi Axtar Spunbond
Filtration Efficiency99.9% @ 0.2-2.0 microns
MERV RatingMERV 13 ±
Total Filtration Area620 sq ft
ContentsPlenum Housing, 4x Cross Braces, 8x Cartridge Filters, 4x Foam Silencers, Stacking Clips, 4x Dust Bins, Filter Efficiency Gauge, Hardware
Country of ManufactureUnited States
Applicable PatentsPatent #9,370,740
Write Your Own Review
You're reviewing:Industrial Quad-Filter Hanging Plenum Assembly
Your Rating
Frequently Asked Questions
How do I clean this filter?

Clean this filter using compressed air blown from the outside of the filter. The nozzle should be angled roughly 20° and pointed into the filter's pleating. Keep the air nozzle at least 6" away from the filter to prevent damage to the filter media. We do not recommend using water to clean this filter.This cartridge filter has a pleating arrangement that is widely spaced for significantly faster and easier cleanings compared to competitive models. Additionally, the filter media is coated with a non-stick PTFE membrane that allows for quick dust release when cleaning.

How often should I clean the filter?

This can vary widely depending on how often your dust collector is used, and what kind of dusts it's exposed to. You should typically clean it only once you've noticed a considerable drop in suction performance. In our experience this can be around 1x per year, but with heavy amounts of sanding it could be as often as 1x per month. A pressure meter such as our Filter Efficiency Gauge can also be used to monitor pressure buildup.

When should I replace this filter?

With regular maintenance, our cartridge filters can easily last up to 5 years. Your filter should only be replaced if thorough cleanings do not help to restore your suction performance.

Did you find what you were looking for?

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.