New

Actual appearance may vary to that shown above.

18" Compact Stacking Sound Filter

Compact silencer unit reduces the dust collector's noise output by 4-5 dBA without increasing the system's overall footprint. Installs in minutes onto the cartridge filters of the High Vacuum dust collector.
In stock
SKU
BSS181000
$219.00

Efficient & Compact Noise Reduction

Constructed from heavy-gauge, welded steel with an industrial powder coated finish, these sound filters can significantly reduce the overall noise level of your dust collection system. Ideal for commercial applications with noise safety standards, the Stacking Sound Filter™ installs quickly and easily onto Oneida Air Systems' 18" diameter cartridge filters.

  • Reduces system noise output by 4-5dBA at 10 feet
  • Install in minutes onto any of our High Vacuum™ dust collection system
  • Compact design maintains the system's existing height and footprint*
  • Includes gasket and clamp hardware for installation onto system's existing filter

* Each sound filter requires 11" of available height below the filter bin assembly in order to be installed.

Stacking Sound Filter Installed on a High Vacuum Dust Collector

Check out these great reviews and installation videos shared by our customers!


Video review supplied courtesy of ToolMetrix.
The Wood Whisperer tackles noise levels in his shop.
Tool review published by Will Sampson of Woodworking Network.
Specifications
Outer Diameter18"
ShapeCylindrical
Primary Build MaterialsGalvanized Steel
ColorBlack
Width18"
Height10"
Depth18"
Country of ManufactureUnited States
ContentsSound Filter, Stacking Clips
Applicable PatentsU.S. Patent #9,370,740
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Frequently Asked Questions
Can Stacking Sound Filters be combined?

Yes; If you have room underneath the filter assembly (varies by model) then you can stack multiple sound filters, however, the resulting noise reduction per filter is not linear (additive) and is subject to diminishing returns. For example: 1 Sound Filter = 6-7 dBA total reduction 2 Sound Filters = ~9 dBA total reduction 3 Sound Filters = ~10 dBA total reduction 4+ Sound Filters = ~10 dBA total reduction

What is the difference between this unit and the older Exhaust Silencers?

Both the Stacking Sound Filter and the Exhaust Silencer offer similar performance in terms of noise reduction, but exhaust silencers must be installed into the plenum assembly and will increase the overall footprint of the system by 12" to 36" and will require additional components (hangers, square to rounds, etc.). Exhaust Silencers are intended for installation into long transitional ducting such as when the filter is located far from the collector - typical of industrial systems such as the Direct Drive. Comparatively, the Stacking Sound Filters can be installed quickly and easily, requiring no additional components.

Will the 18" x 10" sound filter fit my dust collector?

This product is designed for use with Oneida Air dust collectors with an external 18" diameter cartridge filter that is attached via J-Bolts to the plenum elbow; this includes all High Vacuum dust collectors manufactured after 2012 (items #XXK050133 and #XXK050333). If you have an older system with a filter that is secured to the plenum via a threaded rod running through the center of the filter stack, you will need to purchase an additional 11" threaded rod length and a coupler (available at any local hardware store) to provide enough room to attach the Stacking Sound Filter.

Did you find what you were looking for?

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.