Actual appearance may vary to that shown above.

2.5" Tapered SC Vacuum Hose Elbow

For creating smooth 90 degree hose turns with minimal loss of air performance. Molded from an industrial static conductive resin to maintain your vacuum's static grounding pathway. Tapered on one end for easy friction-fit hose connections. Fits over the 2" ports of standard Dust Deputy cyclones.
In stock
SKU
AXD600103
$10.85

This vacuum elbow is injection molded from a lightweight static conductive resin and designed for use in electronically sensitive and industrial applications. Works in conjunction with other static conductive materials (e.g. hoses, the Dust DeputyDIY SD, the Ultimate Dust Deputy, grounded vacuums, etc.) to maintain a grounding pathway. The smaller opening is tapered to allow for quick and easy hose connections.

Please note: This elbow is nearly identical to the one packaged with the Ultimate Dust Deputy the difference being that this elbow does not contain the pre-installed port for the Ultimate's Bag Hold Down system's suction tube. As such this should not be ordered as a replacement elbow for the Ultimate Dust Deputy. To order a replacement elbow for said product please call us direct at 1-800-732-4065.

Specifications
Connection TypeMale / Female
Inner Diameter1.75" (A)
2.125" (B)
Outer Diameter2" Tapered (A)
2.25" (B)
Primary Build MaterialsSD Polyethylene
Static Resistance RatingStatic Conductive
ColorBlack
Country of ManufactureUnited States
Similar Products
Write Your Own Review
You're reviewing:2.5" Tapered SC Vacuum Hose Elbow
Your Rating
Frequently Asked Questions
No Questions
Did you find what you were looking for?

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.