Actual appearance may vary to that shown above.

2HP Dust Gorilla Portable Cyclone Dust Collector w/ SMART Boost

SMART variable speed motor automatically adjusts the fan's RPM to maximize both suction and CFM - ideal for tools with mixed port sizes such as CNC machines. Portable system includes certified HEPA filtration, bin level sensor, remote control, and more.
SKU
XXS020100

Product Has Been Discontinued

Please contact us if you need additional support.


The Smart Dust Collector is a patented, variable speed cyclone dust collector. It adjusts the impeller speed automatically to always generate the maximum amount of suction and airflow for a given horsepower.

CFM at End of Hoses

Hose Length Static Pressure CFM
6" Dia. 10' 3.0" WC 930
5" Dia. 10' 9.5" WC 725
4" Dia. 10' 13.5" WC 525
3" Dia. 10' 17.0" WC 410
2" Dia. 10' 20.0" WC 265
Award

2011 Innov8 Award

WOOD Magazine, December / January 2011, Issue # 151

Award

2010 Editors Choice - American Woodworker

American Woodworker magazine, December / January, Issue #151. The Smart Collector was picked as Editor's Choice. It outperformed all other dust collectors. The Smart Dust Collector had the most airflow, highest suction and best filtration.

Award

IWF 2010 Challengers Award Finalist

The "Challengers Distinguished Achievement Award" is internationally recognized as one of the industry's highest honors in recognizing achievements in technology, process or significant contributions to environmental improvement in the woodworking industry.

Features

Feature Filtration - GE H12 certified HEPA media Filter.
Feature Variable Speed - Automatically adjusts to maximize suction and CFM
Feature Drum Full Strobe Light - Dust Sentry bin sensor flashes strobe light when dust barrel is full. Highly visible- alerts you from across the room.
Feature Flame Guard Protection - Passive safety device to assist with OSHA compliance for industry.
Feature Drop down 35gallon steel dustbarrel with castors. Easy dust removal and clearance to travel over electrical cords.
Feature Patented V-Cyclone Technology - Higher efficiency fine separation than traditional cyclones.
Feature Radio Frequency Remote Control - Long range, works through walls.
Feature USA Made with Baldor Motor - US made in Syracuse, NY. Serviceable motor with grease fittings.
Feature Drum Liner - Includes a drum liner and hold down.
Specifications
Horsepower2HP
Motor TypeU.S. Baldor® TEFC Motor
Motor Service Factor1.15
Voltage230V
Recommended Breaker Size20A
Amperage (Typical)14A
Phase (Pre-Wired)1-Phase
Frequency60Hz
Power ConnectorNEMA 6-20
Power Cord Length20 feet
Impeller TypeSingle-piece, backward inclined, non-sparking/non-ferrous, cast aluminum alloy.
Impeller Size13" Dia.
Real CFM Rating930 Actual CFM at 3" S.P.
Maximum Suction23" WC
Noise Level78-81 dBA @ 10 ft
Filter Media TypeG.E. H12 HEPA
Filtration Efficiency99.97% @ 0.3 microns
MERV RatingMERV 16 ±
Total Filtration Area95 sq ft
Waste Capacity35 Gallon
PortableYes
Remote ControlIncluded
Primary Build MaterialsCold Rolled Steel
WeldingSeam Welded
Static Resistance RatingConductive (Metal)
ColorYellow
ContentsBlower Motor Assembly, Variable Speed Driver, Magnetic Starter, Remote Control, Fan Housing, Cyclone Separator, Filter Plenum, FlameGuard Cartridge Filter, Internal Silencer, Stand, 3x Wheels, Drum, Bag Holder, 3x Drum Casters, Bin Level Sensor, Hardware
Country of ManufactureUnited States
Warranty Information2 Year Limited Warranty
CertificationsComplete system is cETLus certified for indoor use
Applicable Patents#7,247,180, #7,824,457, #8,377,160, #8,491,685, #8,491,686, #8,496,719, #8,514,090
Inlet Size6" Dia.
Width48"
Depth33"
Height77"
Height to Center of Inlet55"
Write Your Own Review
You're reviewing:2HP Dust Gorilla Portable Cyclone Dust Collector w/ SMART Boost
Your Rating
Frequently Asked Questions
Can this be used for wet applications as well?

No. This system is designed for use collecting dry materials only.

Is this product compatible with Quick-Clamp Duct?

Yes but you will need to install a Machine Adapter into the inlet first. These adapters are smaller on the raw end than traditional ducting so that they can slip into the ports on systems and tools i.e. a 5" Quick-Clamp Duct Machine Adapter will measure ~4.9" O.D. on the raw end.

What dust can be collected with your collector?

Oneida Air Systems' dust collectors are designed and tested for wood and wood dust. They can and have been be used effectively for various other dusts and chips such as drywall dust, paper dust, agricultural dust, metal chips and other forms of debris. The customer is however, cautioned that some common materials when cut, ground or processed by machinery may become very dangerous: highly toxic, flammable, or deflagrable and explosive and they should therefore ensure that you use your particular use of a dust collection system in accordance to national, state, local, NFPA, OSHA and all other applicable codes.

Did you find what you were looking for?

  Proposition 65. California requires the following notice: WARNING: This product may expose you to chemicals, including nickel, which are known to the State of California to cause cancer or birth defects or reproductive harm. For more information, visit P65Warnings.ca.gov.

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.