3HP 3ph Standalone Direct Drive Fan Blower
Perfect for Transfer Systems!
Ideal for industrial applications that produce high volumes of dust, Oneida Air Systems' direct drive fan blowers are great for conveying dust away from the primary dust collection system to be deposited in a larger waste container (e.g. hopper, dumpster, truck bed, etc.) for disposal. Should installed in combination with our Rotary Air Locks to preserve airflow performance within the dust control system. Our fan blowers are built to last a lifetime with high quality components including a U.S. made Baldor® motor, cast-aluminium alloy fan wheels, cold rolled-steel fan housing, rust preventative powder coating, and industrial seam weld construction.
|Motor Type||U.S. Baldor® TEFC Motor|
|Motor Service Factor||1.15|
|Recommended Breaker Size||20A|
|Amperage (Typical)||7.9-7.2A (3.6A @ 460V)|
|Impeller Type||Single-piece, backward inclined, non-sparking/non-ferrous, cast aluminum alloy.|
|Impeller Size||14-1/4" Dia.|
|Real CFM Rating||1,700 Actual CFM|
|Remote Control||Call for Info|
|Primary Build Materials||Cold Rolled Steel|
|Static Resistance Rating||Conductive (Metal)|
|Inlet Size||8" Dia.|
|Outlet Size||ID: 7-1/4"(W) x 6-1/4"(H)|
OD: 10"(W) x 9"(H)
|Height to Center of Inlet||15"|
|Contents||Blower Motor Assembly, Fan Housing|
|Country of Manufacture||United States|
|Warranty Information||1 Year Limited Warranty|
Yes but you will need to install a Machine Adapter into the inlet first. These adapters are smaller on the raw end than traditional ducting so that they can slip into the ports on systems and tools i.e. a 5" Quick-Clamp Duct Machine Adapter will measure ~4.9" O.D. on the raw end.
If you have conditioned air in your shop, (Heat or cool) then exhausting outside can be costly. If your building is small and well-sealed, you can interfere with flue exhausts as well. Close neighbors might object. If the Dust Collection system is run intermittently it is generally not a problem. Most buildings have enough leaks and crevices where the aforementioned volume of air does not cause problems. If you have a problem opening or closing an outside door when the DC is running, crack a window slightly. The rule of thumb is for every 500 CFM have at least 1 sq/ft of return air coming back into the shop. A lot of our customers blow exhaust air outside successfully.