New

Actual appearance may vary to that shown above.

3HP Dust Gorilla Pro SMART Boost Cyclone Dust Collector Package

Powerful, award winning system for professional workshops large and small. Includes a high efficiency, 3HP U.S. made motor, RF remote control, hospital-grade HEPA filtration, and a heavy-gauge steel cyclone separator. Comes equipped with our patented SMART Boost technology that doubles airflow performance through smaller ports and long ducting runs - ideal for CNC machines! Custom choice of powder coated steel leg kit or wall bracket with 35 to 55 gallon steel dust bins.

In stock

SKU
XGK030105H-S
East VS. West Coast Shipping Rates

Shipping fees will vary based on distance with the continental United States (Lower 48). The cost $114.00 if the destination is east of the Mississippi River, $214.00 if on the west. Additional rates may apply if you require residential service, lift gates, or delivery notification to complete your order.

Customize 3HP Dust Gorilla Pro SMART Boost Cyclone Dust Collector Package

* Required

Your Customization
3HP Dust Gorilla Pro SMART Boost Cyclone Dust Collector Package (#XGK030105H-S)
3HP Dust Gorilla Pro SMART Boost Cyclone Dust Collector Package

In stock

$2,883.00

Summary

    Kit Modification: If you need further customization of your system (e.g. mounting options, waste container upgrades, different filtration, etc.) contact us directly and one of our representatives will work with you to build the system that best meets your shop's needs.

    Introducing: The Last Dust Collector You'll Ever Need - Now With Twice The Airflow!

    Choosing the best dust collector for your shop can be difficult, especially when you start combining mixed/undersized dust port and long runs of ducting or hoses. Oneida Air Systems' patented SMART Boost™ technology offers the only solution that can adapt to nearly any shop layout!

    Our unique SMART Boost monitors your system for any suction loss and automatically adjust the fan motor's speed to compensate - delivering maximum air volume for a wide range of tools and delivering higher suction at the cutter head where you need it the most!

    The Dust Gorilla Pro Combines the award-winning features of our Super Dust Gorilla with the rugged construction of our Pro series, this new system will help you maximize your investment and ensure that your shop is running at peak-efficiency for years to come.

    Included Features & Components

    • Industrial 3HP U.S. Made Baldor® Fan Blower Motor
    • SMART Boost Variable Speed Airflow Controller
    • Wireless Radio Frequency Remote Control Keyfob
    • Single-Piece, Smooth-Wall, Molded Fan Housing
    • Heavy-Gauge Steel Cyclone Separator
    • 3rd Party Tested HEPA Cartridge Filter
    • Internal Foam Silencer
    • Steel Angle Frame Stand or Wall-Mounting Bracket
    • 35 or 55 Gallon Reinforced Steel Dust Bin
    • D.I.Y. Ductwork Design Guide
    • 2 Year Limited Warranty

    I have an 8" jointer, a 20" planer, and a 5HP tablesaw all wired into the shop and having designated dust collection really improves the use of those machines. Removing material at the source is huge for keeping the longevity of your cutter heads as well as making sure your blades are used as efficiently as possible … SUPER excited to have this in my shop - it's already drastically improved my workflow. Read more »

    – John Malecki, former Pittsburgh Steeler and owner of METAL & WOOD Custom Furniture



    3HP Dust Gorilla Pro Fan Rating
    OAS uses Actual CFM Ratings that reflect real-world airflow performance.

    Continuously High Airflow Performance

    Our patented SMART Boost technology directly measures resistance placed on the fan motor and automatically increases the fan's speed to compensate when suction is low, ensuring that the motor always works at peak performance levels! This can double your airflow through smaller or mixed ports - perfect for CNC machines!

    • High-efficiency, Baldor® fan blower motor - Made in USA
    • Industrial-grade brushless motor designed for continuous duty
    • Delivers up to 1,340 Actual CFM - ample airflow for multiple woodworking tools.
    • Low pitch noise level provides ideal operator comfort
    • Includes RF remote control that works through walls and up to 100 feet away.
    • System's inlet and outlet rotate independently at 45 degree increments to suit your shop's needs.

    Ultra-High Efficiency Steel Cyclone Separator

    Features Oneida Air Systems' unique long-tapered cyclone design that provides maximum pre-separation efficiency compared to the squatter cyclone designs of competitors.

    • Virtually eliminates filter clogging and suction loss to provide continuous suction performance.
    • 7" dia. neutral-vane inlet for use with common 6" ductwork layouts (reducers available).
    • Industrial 16 gauge steel construction with full welded, airtight seams.
    • Trademark OAS gold, rust preventative, powder coat finish.
    • Significantly extends the lifespan of the filter and reduces downtime needed for cleaning.

    High Quality & Serviceable Filtration

    The Dust Gorilla Pro system uses hospital-grade, HEPA cartridge filters that are specifically designed for dust collection applications - providing unbeatable airflow and filtration performance.

    • OAS fully stands by the quality and performance of our filters; each filter is sent to an accredited independent testing lab. Contact us for more information and documentation.
    • Patented internal acoustic foam reduces noise caused by vibrating outgoing air by 1–2 dBa
    • Patented Flame Guard™ safety mesh rapidly dissipate any heat generated by a deflagration within your filter, helping to comply with future planned NFPA fire safety codes.
    • Fine dust pan captures residual dust that falls off the inside of the filter. Can be removed easily for cleaning after reverse blowing compressed air into the pleats.

    Compact, Configurable Design

    The Dust Gorilla Pro can be equipped with your choice of Freestanding Leg Kit or Wall Mounting Bracket, built from heavy-gauge, powder coated steel for long lasting durability.

    Specifications
    Horsepower3HP
    Motor TypeU.S. Baldor® TEFC Motor
    Motor Service Factor1.15
    Voltage208-230V
    Recommended Breaker Size30A
    Amperage (Typical)15-17.5A
    Phase (Pre-Wired)1-Phase
    Frequency60Hz
    Power ConnectorWire
    Impeller TypeSingle-piece, backward inclined, non-sparking/non-ferrous
    Impeller Size15" Dia.
    Real CFM Rating1,340 Actual CFM
    Maximum Suction23" WC
    Noise Level80-82 dBA @ 10 ft
    Filter Media TypeG.E. H12 HEPA
    Filtration Efficiency99.97% @ 0.3 microns
    MERV RatingMERV 16 ±
    Total Filtration Area110 sq ft
    Remote ControlIncluded
    Primary Build MaterialsCold Rolled Steel, SD Polyethylene
    WeldingSeam Welded
    Static Resistance RatingConductive (Metal)
    ColorYellow
    Country of ManufactureUnited States
    Warranty Information2 Year Limited Warranty
    CertificationsComplete system is cETLus certified for indoor use
    ContentsBlower Motor Assembly, SMART Boost Controller, Fan Housing, Cyclone Separator, Filter Plenum, FlameGuard Cartridge Filter, Internal Silencer, Remote Control, Hardware
    Applicable Patents#8,491,685, #7,247,180, #8,496,719, #8,377,160
    Inlet Size7" Dia.
    Outlet SizeSquare ID: 7-3/8"(W) x 6-3/8"(H)
    Discharge Size9" Dia.
    Width48"
    Depth30"
    Height94" w/ 35 Gal. Stand
    110" w/ 55 Gal. Stand
    Height to Center of Inlet66.5" w/ 35 Gal. Stand
    78.5" w/ 55 Gal. Stand
    Write Your Own Review
    You're reviewing:3HP Dust Gorilla Pro SMART Boost Cyclone Dust Collector Package
    Your Rating
    Frequently Asked Questions
    Can I vent my system outside?

    If you have conditioned air in your shop, (Heat or cool) then exhausting outside can be costly. If your building is small and well-sealed, you can interfere with flue exhausts as well. Close neighbors might object. If the Dust Collection system is run intermittently it is generally not a problem. Most buildings have enough leaks and crevices where the aforementioned volume of air does not cause problems. If you have a problem opening or closing an outside door when the DC is running, crack a window slightly. The rule of thumb is for every 500 CFM have at least 1 sq/ft of return air coming back into the shop. A lot of our customers blow exhaust air outside successfully.

    Can this be used for wet applications as well?

    No. This system is designed for use collecting dry materials only.

    Is this product compatible with Quick-Clamp Duct?

    Yes but you will need to install a Machine Adapter into the inlet first. These adapters are smaller on the raw end than traditional ducting so that they can slip into the ports on systems and tools i.e. a 5" Quick-Clamp Duct Machine Adapter will measure ~4.9" O.D. on the raw end.

    What dust can be collected with your collector?

    Oneida Air Systems' dust collectors are designed and tested for wood and wood dust. They can and have been be used effectively for various other dusts and chips such as drywall dust, paper dust, agricultural dust, metal chips and other forms of debris. The customer is however, cautioned that some common materials when cut, ground or processed by machinery may become very dangerous: highly toxic, flammable, or deflagrable and explosive and they should therefore ensure that you use your particular use of a dust collection system in accordance to national, state, local, NFPA, OSHA and all other applicable codes.

    Did you find what you were looking for?

    Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.