Actual appearance may vary to that shown above.

V-System 3000 Freestanding 35 Gal. Cyclone Dust Collector

100% of 100
  • Industrial 230V U.S. made fan motor provides ample CFM for up to 2 tools at once with 4"-6" dust ports.
  • High efficiency cyclone (99%+ separation) with smooth, compound molded surface
  • Operates at ultra-quiet noise level, only 75dBA at 10 feet.
  • 3rd party tested, HEPA filtration with non-stick membrane for easy cleaning.
  • Durable, lightweight construction allows for quick and easy installation.

This Product Is Obsolete

This item has been replaced by the new and improved 2019 Edition of the V-3000 Dust Collector. Packed with more features to make it even quieter and easier to use!

Quiet, Compact, and Powerful - Ideal for Small Personal Workshops!

This system is ideal for use in small 1-2 man shops operating tools such as lathes, planers, radial/miter saws, and more!

The V-System's molded static conductive resin construction speeds up and simplifies system assembly, maximizes airflow performance, and significantly reduces noise levels.

Included Features & Components

  • Industrial 3HP U.S. Made Motor (230V)
  • Magnetic Starter w/ Overload Protector
  • High-Efficiency Molded Cyclone Separator
  • 3rd Party Tested HEPA Cartridge Filter
  • Patented Internal Foam Silencer
  • Compact Steel Angle Frame Stand
  • 35 Gallon Dust Drum
  • D.I.Y. Ductwork Design Guide
  • 1 Year Limited Warranty

V-System Product Family Fan Performance Curve
OAS uses Actual CFM Ratings that reflect real-world airflow performance.

Continuously High Airflow Performance

Your dust collector should perform at peak efficiency at all times to ensure the health, safety, and quality of your work. That's why Oneida Air Systems uses only the highest quality motors with our dust collection systems. Far superior than the cheap, foreign imported motors used by other manufacturers, our industrial-grade motors are built to last a lifetime.

  • High-efficiency, U.S. made fan motor
  • Delivers up to 1,349 Actual CFM at 2.3" S.P. - ample airflow for any woodworking tool
  • Industrial-grade brushless motor designed for continuous duty
  • System's inlet and outlet rotate independently at 45 degree increments to suit your shop's needs.
  • Low pitch noise level provides ideal operator comfort
Closeup of V-System cyclone inlet

Streamlined Integrated Cyclone Separator

The V-System features an ultra-high efficiency cyclone which pre-separates up to 99% of fine dust and bulk debris, removing it from the airstream and collecting it safely below the cyclone.

  • Virtually eliminates filter clogging and suction loss to provide continuous suction performance.
  • Smooth, molded design reduces air turbulence to improve airflow performance and lower overall noise output.
  • 7" dia. neutral-vane inlet for use with common 6" ductwork layouts (reducers available).
  • Patented "V-Shape" cyclone design minimizes the system's overall height while maintaining airflow and separation efficiency.
  • Significantly extends the lifespan of the filter and reduces downtime needed for cleaning.
V-System Filter and Plenum

High Quality & Serviceable Filtration

The V-System system uses certified H12 HEPA media cartridge filters that are specifically designed for dust collection applications - providing unbeatable airflow and filtration performance.

  • Oneida Air fully stands by the quality and performance of our filters; each filter is sent to an accredited independent testing lab. Contact us for more information and documentation.
  • Patented internal acoustic foam reduces noise caused by vibrating outgoing air by 1–2 dBa
  • Patented Flame Guard™ safety mesh rapidly dissipate any heat generated by a deflagration within your filter, helping to comply with future planned NFPA fire safety codes.
  • Fine dust pan captures residual dust that falls off the inside of the filter. Can be removed easily for cleaning after reverse blowing compressed air into the pleats.
V-System Stand

Compact, Configurable Design

This unit is equipped with a Freestanding Leg Kit and has been built specifically to fit underneath standard 8ft ceilings; perfect for garage or basement shops!

Motor TypeU.S. TEFC Motor
Motor Service Factor1
Recommended Breaker Size20A
Amperage (Typical)13A
Phase (Pre-Wired)1-Phase
Power ConnectorNEMA 6-20
Power Cord Length10 feet
Impeller TypeSingle-piece, backward inclined, non-sparking/non-ferrous
Impeller Size15" Dia.
Real CFM Rating1,349 Actual CFM at 2.3" WC
Maximum Suction13" WC
Filter Media TypeG.E. H12 HEPA
Filtration Efficiency99.97% @ 0.3 microns
MERV RatingMERV 16 ±
Total Filtration Area95 sq ft
Waste Capacity35 Gallon
Remote ControlIncluded
Primary Build MaterialsSD Polyethylene
Static Resistance RatingStatic Dissipative
Inlet Size7" OD
Outlet SizeSquare ID: 7-3/8"(W) x 6-3/8"(H)
Discharge Size7" Dia.
Height to Center of Inlet63" w/ 35 Gal. Stand
75" w/ 55 Gal. Stand
ContentsBlower Motor Assembly, Magnetic Starter, Fan Housing, Filter Plenum, FlameGuard Cartridge Filter, Freestanding Leg Kit, Fiberboard Dust Bin, Internal Silencer, Cyclone Separator, Remote Control, Hardware
Country of ManufactureUnited States
Warranty Information1 Year Limited Warranty
CertificationsComplete system is cETLus certified for indoor use
Applicable Patents#7,247,180, #8,377,160, #8,496,719
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Frequently Asked Questions
What is the floor space required for the V-1500 w/ 35 gallon drum?

On the floor, the V-System's stand is a 30" x 30" square. How wide the overall system is depends on ...

Can it be used with a smaller dust bin to lower the total height to 80”

With the stand, the V-System's overall height cannot be lower than 87" (for 1.5HP) or 88" (for 3HP). ...

Will the 3HP motor work with 208 volt single phase power?

Yes. The V-3000 dust collector can be operated at a voltage range of 208V to 230V in single phase.

  California Residents: Please visit for information regarding Proposition 65 for our products.

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.