Actual appearance may vary to that shown above.

4" x 4" Saddle Tap Wye

Galvanized steel wye joints installs onto existing 4" diameter round ductwork and creates a new 45 degree branch.
SKU
DWT040404
$52.55

Build a New Branch Off of Your Existing Ducting Run

Saddles can be used to install a branch into existing ductwork without having to disassemble the run. Cut a hole into the existing duct then attach the saddle over the hole. Secure the saddle to the existing duct with sheet metal screws or pop-rivets and seal it in place with silicone caulk.

Specifications
Length of Ends2"
Ductwork TypeStandard
Connection TypeFemale
ShapeRound
Primary Build MaterialsGalvanized Steel
Thickness24 Gauge
WeldingSpot Welded
Static Resistance RatingConductive (Metal)
ColorSilver
Product Weight1.40
Country of ManufactureUnited States
Write Your Own Review
You're reviewing:4" x 4" Saddle Tap Wye
Your Rating
Frequently Asked Questions
No Questions
Did you find what you were looking for?

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.