Actual appearance may vary to that shown above.

5HP 3ph Standalone Direct Drive Fan Blower

Industrial fan blower motor and housing with cast-aluminum impeller.
In stock
SKU
BXS050399
$1,456.00

Perfect for Transfer Systems!

Ideal for industrial applications that produce high volumes of dust, Oneida Air Systems' direct drive fan blowers are great for conveying dust away from the primary dust collection system to be deposited in a larger waste container (e.g. hopper, dumpster, truck bed, etc.) for disposal. Should installed in combination with our Rotary Air Locks to preserve airflow performance within the dust control system. Our fan blowers are built to last a lifetime with high quality components including a U.S. made Baldor® motor, cast-aluminium alloy fan wheels, cold rolled-steel fan housing, rust preventative powder coating, and industrial seam weld construction.

Specifications
Horsepower5HP
Motor TypeU.S. Baldor® TEFC Motor
Motor Service Factor1.15
Voltage208-230V, 460V
Recommended Breaker Size30A
Amperage (Typical)12-11.8A (5.9A @ 460V)
Phase (Pre-Wired)3-Phase
Frequency60Hz
Power ConnectorWire
Power Cord Length10 feet
Impeller TypeSingle-piece, backward inclined, non-sparking/non-ferrous, cast aluminum alloy.
Impeller Size15" Dia.
Real CFM Rating1,950 Actual CFM
Waste CapacityCustomizeable
Remote ControlCall for Info
Primary Build MaterialsCold Rolled Steel
WeldingSeam Welded
Static Resistance RatingConductive (Metal)
ColorWhite
Country of ManufactureUnited States
Warranty Information1 Year Limited Warranty
ContentsBlower Motor Assembly, Fan Housing
Inlet Size8" Dia.
Outlet SizeID: 7-1/4"(W) x 6-1/4"(H)
OD: 10"(W) x 9"(H)
Width26"
Depth23"
Height27"
Height to Center of Inlet15"
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Frequently Asked Questions
Can I vent my system outside?

If you have conditioned air in your shop, (Heat or cool) then exhausting outside can be costly. If your building is small and well-sealed, you can interfere with flue exhausts as well. Close neighbors might object. If the Dust Collection system is run intermittently it is generally not a problem. Most buildings have enough leaks and crevices where the aforementioned volume of air does not cause problems. If you have a problem opening or closing an outside door when the DC is running, crack a window slightly. The rule of thumb is for every 500 CFM have at least 1 sq/ft of return air coming back into the shop. A lot of our customers blow exhaust air outside successfully.

Is this product compatible with Quick-Clamp Duct?

Yes but you will need to install a Machine Adapter into the inlet first. These adapters are smaller on the raw end than traditional ducting so that they can slip into the ports on systems and tools i.e. a 5" Quick-Clamp Duct Machine Adapter will measure ~4.9" O.D. on the raw end.

Did you find what you were looking for?

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.