5HP Dust Gorilla Pro Cyclone Dust Collector
Introducing: The Last Dust Collector You'll Ever Need
Oneida Air Systems is proud to introduce the latest evolution of our world famous cyclone dust collectors: the new Dust Gorilla® Pro. Combining the award-winning features of our Super Dust Gorilla with the rugged construction of our Pro series, this new system will help you maximize your investment and ensure that your shop is running at peak-efficiency for years to come.
This system is proudly made in the USA with industrial grade components and includes a full complement of safety features to provide for a clean, healthy, and efficient work environment.
|Motor Type||U.S. Baldor® TEFC Motor|
|Recommended Breaker Size||30A|
|Power Connector||NEMA 6-20|
|Power Cord Length||10 feet|
|Impeller Type||Single-piece, backward inclined, non-sparking/non-ferrous, cast aluminum alloy.|
|Impeller Size||15" Dia.|
|Real CFM Rating||1,860 Actual CFM at 2.5" S.P.|
|Free Fan CFM Rating||2,976 CFM|
|Noise Level||80-82 dBA @ 10 ft|
|Filter Media Type||G.E. H12 HEPA|
|Filtration Efficiency||99.97% @ 0.3 microns|
|MERV Rating||MERV 16 ±|
|Total Filtration Area||110 sq ft|
|Waste Capacity||35 Gallon, 55 Gallon|
|Remote Control||Sold Separately|
|Remote Control Part #||Item #AXR220000|
|Primary Build Materials||Cold Rolled Steel, SD Polyethylene|
|Static Resistance Rating||Conductive (Metal)|
|Contents||Blower Motor Assembly, Magnetic Starter, Fan Housing, Cyclone Separator, Filter Plenum, FlameGuard Cartridge Filter, Internal Silencer, Hardware|
|Country of Manufacture||United States|
|Warranty Information||2 Year Limited Warranty|
|Applicable Patents||#7,247,180, #8,496,719|
|Inlet Size||8" Dia.|
|Outlet Size||Square ID: 7-3/8"(W) x 6-3/8"(H)|
|Discharge Size||10" Dia.|
|Height to Center of Inlet||68" w/ 35 Gal. Stand|
81" w/ 55 Gal. Stand
If you have conditioned air in your shop, (Heat or cool) then exhausting outside can be costly. If your building is small and well-sealed, you can interfere with flue exhausts as well. Close neighbors might object. If the Dust Collection system is run intermittently it is generally not a problem. Most buildings have enough leaks and crevices where the aforementioned volume of air does not cause problems. If you have a problem opening or closing an outside door when the DC is running, crack a window slightly. The rule of thumb is for every 500 CFM have at least 1 sq/ft of return air coming back into the shop. A lot of our customers blow exhaust air outside successfully.
No. This system is designed for use collecting dry materials only.
Yes but you will need to install a Machine Adapter into the inlet first. These adapters are smaller on the raw end than traditional ducting so that they can slip into the ports on systems and tools i.e. a 5" Quick-Clamp Duct Machine Adapter will measure ~4.9" O.D. on the raw end.
Oneida Air Systems' dust collectors are designed and tested for wood and wood dust. They can and have been be used effectively for various other dusts and chips such as drywall dust, paper dust, agricultural dust, metal chips and other forms of debris. The customer is however, cautioned that some common materials when cut, ground or processed by machinery may become very dangerous: highly toxic, flammable, or deflagrable and explosive and they should therefore ensure that you use your particular use of a dust collection system in accordance to national, state, local, NFPA, OSHA and all other applicable codes.