Actual appearance may vary to that shown above.

Internal 8.5" x 16" C-Rated Spunbond Cartridge Filter

100% of 100
Engineered for low pressure drop using durable Izumi Axtar spunbond media; 3rd-party tested for filtration efficiency. Features wide-spaced pleats with teflon-like PTFE coating for quick & easy cleaning. Designed for use with older 1.5HP Component systems by OAS.

Compact Filtration for 2HP Component Dust Collection Systems

This Spunbond Cartridge Filter is excellent for small, flour-sized dust particles as small as 1 micron and can replace the role of multiple polyester filter dust bags. Its wide spaced pleating and non-stick PTFE membrane coating resists clogging and faciliatates easy cleaning using reverse-blown compressed air or water.

This unit was originally designed for internal use with our older 1.5HP Dust Collection Systems (Item # XXK010100) but can be used in any application of your choosing. See specifications tab for more detailed information.

Horsepower Rating1HP-1.5HP
Filter Media TypeIzumi Axtar Spunbond
Filtration Efficiency99.9% @ 0.2-2.0 microns
MERV RatingMERV 13 ±
Filter End TypeSingle Open Ended
Total Filtration Area35 sq ft
Primary Build MaterialsSteel, Polyester
ReinforcementInternal Wire Cage
Inner Diameter5.8"
Outer Diameter8.5"
Country of ManufactureUnited States
Applicable PatentsPatent #5,746,795
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Frequently Asked Questions
How often should I clean the dust collector's cartridge filter?

This can vary widely depending on how often your dust collector is used and what kind of dusts it's exposed to but you should typically clean it only once you've noticed a considerable drop in suction performance. In our experience this can be around once per year, but with heavy amounts of sanding it could be as often as once per month.

A meter such as our Filter Efficiency Gauge can also be used to monitor pressure buildup and inform you when the filter need's to be cleaned.

How do I clean this filter?

Clean this filter using compressed air blown from the outside of the filter. The nozzle should be angled roughly 20° and pointed into the filter's pleating. Keep the air nozzle at least 6" away from the filter to prevent damage to the filter media. We do not recommend using water to clean this filter.This cartridge filter has a pleating arrangement that is widely spaced for significantly faster and easier cleanings compared to competitive models. Additionally, the filter media is coated with a non-stick PTFE membrane that allows for quick dust release when cleaning.

When should I replace this filter?

With regular maintenance, our cartridge filters can easily last up to 5 years. Your filter should only be replaced if thorough cleanings do not help to restore your suction performance.

  California Residents: Please visit for information regarding Proposition 65 for our products.

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.