Actual appearance may vary to that shown above.

8" 90 Deg. Spiral Pipe Elbow

Single-piece, machine formed elbow constructed from heavy 22-gauge galvanized steel. Large radius design for optimum airflow performance (CLR = 2.5 x Dia.). Uncrimped on both ends - recommended for use with spiral pipe and adapters.
In stock
SKU
DEH900800
$69.36

This 90 degree ductwork elbow is machine formed from a single piece of heavy gauge galvanized steel with reinforcing segments, making it ideal for industrial applications with highly abrasive materials as well when the ducting must support additional weight (such as a large cartridge filter assembly). This fitting's large radius construction minimizes air resistance, making it ideal for dust collection.

The elbow is raw (uncrimped) both ends; 8" Spiral Pipe Adapters or Angle Rings are required for installation and should be secure with sheet metal screws, pop rivets, or welded in place.

Example installation of spiral pipe for dust collection
Specifications
Radial Size (R)90 Degree
Center Line Radius20.00"
Ductwork TypeSpiral Pipe
Connection TypeFemale
ShapeRound
Primary Build MaterialsGalvanized Steel
Thickness22 Gauge
Static Resistance RatingConductive (Metal)
ColorSilver
Country of ManufactureUnited States
Write Your Own Review
You're reviewing:8" 90 Deg. Spiral Pipe Elbow
Your Rating
Frequently Asked Questions
No Questions
Did you find what you were looking for?

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.