E.U. Export V-2000 Dust Collector
Available by phone order only.
Please Note: Oneida Air Systems' CE Marked Foreign Export Dust Collection Systems are not available for sale online. Please contact us for help sizing the right system for your shop.
|Motor Type||U.S. Leeson® TEFC Motor|
|Power Cord Length||10 feet|
|Impeller Type||Single-piece, backward inclined, non-sparking/non-ferrous, cast aluminum alloy.|
|Impeller Size||15" Dia.|
|Real CFM Rating||1,190 Actual CFM at 1.8" WC|
|Maximum Suction||11" WC|
|Noise Level||75 dBA @ 10 ft|
|Filter Media Type||G.E. H12 HEPA|
|Filtration Efficiency||99.97% @ 0.3 microns|
|MERV Rating||MERV 16 ±|
|Total Filtration Area||95 sq ft|
|Remote Control||Call for Info|
|Primary Build Materials||SD Polyethylene|
|Static Resistance Rating||Static Dissipative|
|Country of Manufacture||United States|
|Warranty Information||1 Year Limited Warranty|
|Certifications||CE Mark Compliant|
|Applicable Patents||#7,247,180, #8,377,160, #8,496,719|
|Inlet Size||7" Dia.|
|Width||47" w/ Filter|
|Depth||32.5" w/ Filter|
|Height||88" w/ 35 Gal. Stand|
100" w/ 55 Gal. Stand
|Height to Center of Inlet||63" w/ 35 Gal. Stand|
75" w/ 55 Gal. Stand
If you have conditioned air in your shop, (Heat or cool) then exhausting outside can be costly. If your building is small and well-sealed, you can interfere with flue exhausts as well. Close neighbors might object. If the Dust Collection system is run intermittently it is generally not a problem. Most buildings have enough leaks and crevices where the aforementioned volume of air does not cause problems. If you have a problem opening or closing an outside door when the DC is running, crack a window slightly. The rule of thumb is for every 500 CFM have at least 1 sq/ft of return air coming back into the shop. A lot of our customers blow exhaust air outside successfully.
Yes but you will need to install a Machine Adapter into the inlet first. These adapters are smaller on the raw end than traditional ducting so that they can slip into the ports on systems and tools i.e. a 5" Quick-Clamp Duct Machine Adapter will measure ~4.9" O.D. on the raw end.
Oneida Air Systems' dust collectors are designed and tested for wood and wood dust. They can and have been be used effectively for various other dusts and chips such as drywall dust, paper dust, agricultural dust, metal chips and other forms of debris. The customer is however, cautioned that some common materials when cut, ground or processed by machinery may become very dangerous: highly toxic, flammable, or deflagrable and explosive and they should therefore ensure that you use your particular use of a dust collection system in accordance to national, state, local, NFPA, OSHA and all other applicable codes.
No. This system is designed for use collecting dry materials only.
On the floor, the V-System's stand is a 30" x 30" square. How wide the overall system is depends on the orientation of your filter plenum. If the plenum is oriented ninety degrees clockwise from the system's inlet, then the overall width would be 47". Please refer to the owner's manual for more detailed dimensions.
With the stand, the V-System's overall height cannot be lower than 87" (for 1.5HP) or 88" (for 3HP). Oneida Air Systems does offer wall-mounting brackets for the V-System, available by phone order only. This would allow you to mount the V-System dust collector at a lower height for use with smaller containers. Please note that you may have to empty the smaller drum much more frequently depending on your workflow.