Universal Dust-Free Router Hood
- Collects router waste from both above and below the bit, virtually eliminating post-project cleanup, facilitating fine detail work, and reducing wear and tear on bits.
- Designed to fit nearly any portable router including plunge, fixed-base, and larger trim routers (e.g. Bosch, Dewalt, Porter Cable, Ryobi, and dozens more!).
- Comes with multiple, snap-on chip covers for edge, shallow edge, and inset routing.
|Inner Diameter||Hose Connection: 1.25"|
|Outer Diameter||Hose Connection: 1.5"|
|Primary Build Materials||Polycarbonate|
|Thickness||Base Plate: 1/4"|
|Contents||Base Plate (Side A & B), Dust Dome, Hose Connect, Deep Chip Cover, Shallow Chip Cover|
|Country of Manufacture||United States|
|Warranty Information||1 Year Limited Warranty|
|Applicable Patents||Patent Pending|
The router hood includes a universal base plate that features multiple screw-hole patterns to fit nearly any portable router available on the market today. We provide a convenient, printable template (see Installation Instructions) that can be used to verify base plate compatibility. The table below lists specific make/models that work with our Router Hood.
Please Note: This specific method of dust collection does not allow the router hood to fit most trim routers
|Router Make/Model||Screw Hole Pattern|
|Black & Decker||TBD|
|Bosch 1617 EVSPK (Plunge)||A|
|Bosch 1617 EVSPK (Fixed)||B|
|Bosch 1618 Series||B|
|Bosch 1619 EVS||C|
|Makita 1100 Series||B|
|Porter Cable 100||B|
|Porter Cable 690||B|
|Porter Cable 890 Series||B|
|Porter Cable 7529||B|
|Porter Cable 8529||B|
Due to the many different routers that are out there, we can't test it on all of them! Trition Routers...
You can find a printable template in the Documents section of the Router Hood's product page. After printing this off you can match the template to the screw holes on the bottom of your portable router to see if it matches.
You can also find a list of tested and proven routers in the same FAQ where you asked this question. Look for the "Will this fit my router?" question
No. This product is designed specifically for use with portable fixed-base and plunge style routers. ...
No. In our effort to make the router hood as universal as possible, inexpensive, easy to use, and effectively...
Yes. For inside edge routing the lower chip cover can be easily detached (no tools necessary) allowing...
Yes. We've successfully tested our router hood with softwoods, hardwoods, plywoods, and fiberboards ...
Very few router manufacturers offer dust extraction for their products, and those that do exist are often expensive and specific to a single make/model. Additionally, competitive router hoods typically only collect debris from above the edge and can easily clog as they are very narrow in design.
Our Router Hood is compatible with almost any make/model portable router. Its unique design fully encloses the bit above and below the edge to capture up to 99% of dust and debris. Both the chip covers and the hose connect can rotate independently so that you can work freely.
This product includes a 1.5" hose connection (1.25" I.D.) that will fit most standard wet/dry vacuum...
Contents include the Universal Base Plate (side A & B combine), the Dust Dome (which encloses the bit...
No, not at this time. The Router hood is molded from high clarity, industrial plastics to maximize visibility...