Quick-Clamp Duct Ball Joints
|Primary Build Materials||Galvanized Steel|
|Static Resistance Rating||Conductive (Metal)|
|Country of Manufacture||United States|
Oneida Air Systems' Quick-Clamp Duct will withstand negative pressures in excess of 50 inches negative water pressure. The duct is NOT a high pressure positive duct.
Besides the standard tape measure, ladders, and any tools that maybe required for attaching hangers, all you'll need to install Quick-Clamp Duct is a saw (preferably a reciprocating/saws-all) to cut the duct for fitting to various lengths. But these are tools required by any ductwork installation. With Oneida Air Systems' Quick-Clamp Duct there's no riveting, no screws, and no welding required.
No. Whether you're installing the duct yourself or installing for a customer, Oneida Air Systems' Quick-Clamp Duct is simple enough for anyone to use.
The ball joints come in 4", 6", 8", 10", and 12" diameters. The overall lengths are: 4"- 9.5" 6"- 11.75" 8"- 14" 10"- 14.25" 12"- 15.25" You can also check out the "Specifications" tab on each product, which has all this information and more!
Yes! As long as the opening pipe diameters are the same, OAS Quick-Clamp Duct components can be combined and used interchangeably with Nordfab® QF ducting and other common clamp-together ductwork products.