7" Intermediate Ductwork Package with 2 Tool Drops
This Intermediate Ductwork Kit is designed for system with 7" inlets and includes all the essentials you'll need to connect two tools simultaneously to your dust collector. Simply use the included blast gates to close off any unused duct runs to ensure maximum air suction performance at all times.
First Time Designing A Shop?
We recommend our Professional Shop Plan Design Service. One of our experienced technicians will work with you directly to maximize your investment for both performance and cost-effectiveness. Revisions and adjustments are included at no additional cost and your technician will be available for support before, during, and after your installation.
If you purchase both your system AND your ductwork from Oneida, the design service fee is 100% refundable!
This Intermediate Ductwork Kit Includes:
Please Note: Be sure to follow all applicable Federal, State, Local, & NFPA codes when installing. For more information on what these type of regulations can mean for you call us toll-free at 1-800-732-4065 to speak with a qualified technician.
|Primary Build Materials||Galvanized Steel|
|Static Resistance Rating||Conductive (Metal)|
|Contents||2x Pipes, 2x Wye Joints, 2x Adjustable Elbows, End Cap, 2x Blast Gates, 2x Male Duct Adapters, 3x Reducers, 4x Female Hose Connects, 2x Male Hose Connects, 2x Hoses, 4x Hose Clamps|
|Country of Manufacture||United States|
Our dust collectors are designed to accommodate crimped ductwork fittings in their inlets. Snap-Lock piping and wye joints sold by Oneida Air Systems are pre-crimped at the factory to simplify installations. The crimped fitting fits inside the collector's inlet and should be secured in place and sealed using silicone caulk or foil tape. If you wish to use a reducer, these can be crimped using tin snips or a hand crimping tool.