Actual appearance may vary to that shown above.

5HP 1ph High Vacuum Cyclone Dust Collector

80% of 100
High static air pressure system for CNC, sanding, and other fine dust applications. Complete system includes heavy-gauge steel cyclone, U.S. Baldor motor, spunbond cartridge filter, angle frame stand, 55 gallon dust bin, filter gauge, and more.
This Items Ships Freight Via Common Carrier

Due its large size and weight, this product must be freight shipped and will require custom billing. Contact us prior to ordering for a free quote; Our service department will contact you after your order is booked for additional freight fees. Review our shipping policy for more information.

High Vacuum Pressure Dust Control for Industrial CNC Cutting Tools

Our 5HP High-Vacuum™ Dust Collector is one of our most powerful professional dust collection systems and is designed for small to medium sized shops running tools, such as CNC machines, where a high amount of static pressure is needed to adequately collect airborne dust. The unique configuration of our High-Vacuum systems make full use of the high-efficiency U.S. motor and cyclone separator to deliver maximum static pressure to multiple tools simultaneously.

This high pressure system is ideal for use with any type of CNC cutting tools as well as saws, jointers, lathes, shapers, planers, routers, sanders, and more!

Included Features & Components

  • Industrial 5HP U.S. Made Baldor® Fan Blower Motor
  • Magnetic Starter w/ Overload Protector
  • Heavy-Gauge Seam Welded Steel Cyclone Separator
  • High-Efficiency Modular Cartridge Filters
  • Real-time Filter Efficiency Gauge
  • Internal Foam Silencer
  • Compact, Heavy-Duty Steel Angle Frame Stand
  • 55 Gallon Reinforced Steel Dust Bin
  • D.I.Y. Ductwork Design Guide
  • 2 Year Limited Warranty

"It's important to understand the dangers of the fine dust that wood shops create. Long term exposure can cause serious health problems and that's why I use and promote [Oneida Air Systems'] products. Their cyclone systems are excellent at filtering out the fine dust particles that are dangerous for woodworker's health. "

– Andy Rawls, Fine Texas Woodcraft

5HP High Vacuum System Fan Performance Curve
OAS uses Actual CFM Ratings that reflect real-world airflow performance.

Continuously High Airflow Performance

Your dust collector should perform at peak efficiency at all times to ensure the health, safety, and quality of your work. That's why Oneida Air Systems uses only the highest quality motors with our dust collection systems. Far superior than the cheap, foreign imported motors used by other manufacturers, our industrial-grade motors are built to last a lifetime.

  • High-efficiency, Baldor® fan blower motor - Made in USA
  • Industrial-grade brushless motor designed for continuous duty
  • Wired for single phase power (3-phase options also available).
  • Delivers up to 2,150 Actual CFM at 2" S.P. - ample airflow for multiple woodworking tools at once.
  • Low pitch noise level provides ideal operator comfort
  • System's inlet and outlet rotate independently at 45 degree increments to suit your shop's needs.
  • Heavy-gauge steel fan housing, full seam welded, built to last a lifetime.

Ultra-High Efficiency Steel Cyclone Separator

Features Oneida Air Systems' unique long-tapered cyclone design that provides maximum pre-separation efficiency compared to the squatter cyclone designs of competitors.

  • Virtually eliminates filter clogging and suction loss to provide continuous suction performance.
  • Significantly extends the lifespan of the filter and reduces downtime needed for cleaning.
  • Large 8" dia. neutral-vane inlet for use with 8" to 6" ductwork layouts.
  • Industrial 16 gauge steel construction with full welded, airtight seams.
  • Durable, rust preventative, almond-white powder coat finish.

High Quality & Serviceable Filtration

The High Vacuum system uses spunbond polyester cartridge filters that are specifically designed for dust collection applications - providing unbeatable airflow and filtration performance - and are proudly made in the USA!

  • OAS fully stands by the quality and performance of our filters; each filter is sent to an accredited independent testing lab. Contact us for more information and documentation.
  • Wide-spaced pleating and non-stick PTFE membrane coating facilitates quick and easy maintenance.
  • Patented filter stacking system provides the filtration area of a single larger filter, but without the cumbersome weight and install, and provides additional savings when replacements are required.
  • Patented internal acoustic foam reduces noise caused by vibrating outgoing air by 1–2 dBa
  • Fine dust pan captures residual dust that falls off the inside of the filter. Can be removed easily for cleaning after reverse blowing compressed air into the pleats.
  • Includes Filter Efficiency Performance Gauge that takes the guesswork out of filter maitenance

Compact, Configurable Design

With its compact footprint, the 5HP High-Vacuum system can be configured to work easily into most ductwork setups. Designed for larger shops running multiple tools, this system can also be outfitted with different support systems and dust container configurations (e.g. splitter kit, hoppers, airlocks, etc.) - Call for details.

Motor TypeU.S. Baldor® TEFC Motor
Motor Service Factor1
Recommended Breaker Size30A
Amperage (Typical)19.5A
Phase (Pre-Wired)1-Phase
Power ConnectorNEMA 6-20
Power Cord Length10 feet
Impeller TypeSingle-piece, backward inclined, non-sparking/non-ferrous, cast aluminum alloy.
Impeller Size16-1/2" Dia.
Real CFM Rating2,150 Actual CFM at 2" S.P.
Free Fan CFM Rating3,225 CFM
Maximum Suction16" WC
Noise Level75-81 dBA @ 10 ft
Filter Media TypeIzumi Axtar Spunbond
Filtration Efficiency99.9% @ 0.2-2.0 microns
MERV RatingMERV 13 ±
Total Filtration Area155 sq ft
Waste Capacity55 Gallon
Remote ControlSold Separately
Primary Build MaterialsCold Rolled Steel
WeldingSeam Welded
Static Resistance RatingConductive (Metal)
Inlet Size8" Dia.
Outlet SizeSquare ID: 10.031" (W) x 7.64" (H) with 1.25" Flange
Discharge Size10" Dia.
Width59" w/ Filter
Height to Center of Inlet80"
ContentsBlower Motor Assembly, Magnetic Starter, Fan Housing, Cyclone Separator, Filter Plenum, 2x Stacking Cartridge Filters, Internal Silencer, Filter Efficiency Gauge, Drum, Stand, Hardware
Country of ManufactureUnited States
Warranty Information2 Year Limited Warranty
CertificationsComplete system is cETLus certified for indoor use
Applicable Patents#7,247,180, #9,370,740
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Frequently Asked Questions
How often should I clean the dust collector's cartridge filter?

This can vary widely depending on how often your dust collector is used and what kind of dusts it's exposed to but you should typically clean it only once you've noticed a considerable drop in suction performance. In our experience this can be around once per year, but with heavy amounts of sanding it could be as often as once per month.

A meter such as our Filter Efficiency Gauge can also be used to monitor pressure buildup and inform you when the filter need's to be cleaned.

My filter gauge is reading 3 and I just installed it onto a new filter - Why is that?

The actual number doesn't really matter. It will be higher when you have more gates open, more airflow through the system and thus more back-pressure on the filter What we really care about is the change in the number. So, take a baseline reading (or set of readings) and monitor them. When the filter gets dirty the pressure and gauge reading will go up. When the reading changes say 1-2" on the gauge that's a good indicator of when you'd want to clean. None of this is exact science but rather an indication of pressure buildup in the filter. Also, cleaning it more often (when the buildup is lower) will normally be easier and quicker than waiting for the filter to be dirtier.

What do I need to know about NFPA regulations?

Fire protection regulations are a complex and ever-changing set of rules that differ from facility to facility. Click the "read more" link to review our Best Practices for Dust Collection Fire Safety or contact us for more detailed assistance.

Is this product compatible with Quick-Clamp Duct?

Yes but you will first need to install a Machine Adapter into the dust collector's inlet. These adapters are smaller on the raw end than traditional ducting so that they can slip into the ports on systems and tools i.e. a 5" Quick-Clamp Duct Machine Adapter will measure ~4.9" O.D. on the raw end.

Can I vent my system outside?

If you have conditioned air in your shop, (Heat or cool) then exhausting outside can be costly. If your building is small and well-sealed, you can interfere with flue exhausts as well. Close neighbors might object. If the Dust Collection system is run intermittently it is generally not a problem. Most buildings have enough leaks and crevices where the aforementioned volume of air does not cause problems. If you have a problem opening or closing an outside door when the DC is running, crack a window slightly. The rule of thumb is for every 500 CFM have at least 1 sq/ft of return air coming back into the shop. A lot of our customers blow exhaust air outside successfully.

What dust can be collected with your collector?

Oneida Air Systems' dust collectors are designed and tested for wood and wood dust. They can and have been be used effectively for various other dusts and chips such as drywall dust, paper dust, agricultural dust, metal chips and other forms of debris. The customer is however, cautioned that some common materials when cut, ground or processed by machinery may become very dangerous: highly toxic, flammable, or deflagrable and explosive and they should therefore ensure that you use your particular use of a dust collection system in accordance to national, state, local, NFPA, OSHA and all other applicable codes.

Can this be used for wet applications as well?

No. This system is designed for use collecting dry materials only.

  California Residents: Please visit for information regarding Proposition 65 for our products.

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.