Actual appearance may vary to that shown above.

10HP System Support Structure - Dual Drum

Heavy-duty angle iron bracket stand for use with our industrial 10HP Direct Drive Dust Collection System. Designed for installations using two dust containers or large industrial hoppers beneath the dust collector.

Industrial Support for our Industrial System

Heavy-duty angle iron bracket stand designed for use with our industrial 10HP Direct Drive Dust Collection System. Provides industrial support of the system with ample clearance to install a dual-drum splitter kit or feed hopper underneath the cyclone - attached directly to its 10" dia. discharge port.

Please Note: Systems with a rotary airlock installed may require additional leg extensions to fit a feed hopper underneath the feeder valve.

Waste Capacity55 Gallon, 110 Gallon, 1 Cubic Yard, 1.5 Cubic Yards, 2 Cubic Yards, Customizeable
Primary Build MaterialsCold Rolled Steel, Hot Rolled Steel
ContentsWelded H-Frame, 4x Welded Leg Assemblies, 5x Support Bars, 6x Cross Braces, 4x Plenum Support Bars, Hardware
Country of ManufactureUnited States
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Frequently Asked Questions
No Questions

  California Residents: Please visit for information regarding Proposition 65 for our products.

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.