10 Gal. Dust Deputy Deluxe Kit
Innovation In Dust Collection
It's what Oneida does, it's who we are. And now, enjoy the versatility of our translucent plastic Dust Deputy!
Injection molded from an industrial anti-static resin, you now have even more options of mounting it in your shop with easier hose connections courtesy of the tapered inlet and outlet (2" inner diameters). Oneida Air's patented Dust Deputy will transform your vacuum. Attach the Dust Deputy and sand for hours. It captures 99% of the dust before it reaches your vacuum, resulting in virtually no filter clogging or loss of suction. You will extend the life of your vacuum and your filters, saving you money on replacements!
- Injection molded anti-static Dust Deputy cyclone separator
- 10 Gallon steel drum with locking lever ring clamp and pre-cut lid
- Drum dolly frame with 4x free-rotating caster wheels
- 5.5 ft of 2.5" wire reinforced flex-hose
- Static Conductive copper foil tape (for additional grounding)
- Foam gasket and mounting hardware
|Waste Capacity||10 Gallon|
|Inlet Size||2" O.D. (Tapered)|
|Outlet Size||2" O.D. (Tapered)|
|Primary Build Materials||Polyethylene|
|Thickness||22 Gauge (Drum Body)|
|Static Resistance Rating||Anti-Static|
|Contents||Cyclone Separator, Pre-Cut Drum Lid, Drum Dolly, Caster Wheels, Hose, Hardware|
|Country of Manufacture||United States|
|Warranty Information||1 Year Limited Warranty|
|Applicable Patents||Patent #7,282,074 B1 and #7,282,074 C1, #6,833,016 B2|
The Dust Deputy can be used with any make, model, or size wet/dry vacuum with an inlet ranging from 1.5" to 2.5" in size. We recommend that it has an airflow rating of at least 50 CFM to ensure optimum dust separation performance.
You'll want to apply the tape so that all three openings on the cyclone are connected by a continuous, conductive path. When doing so, make sure that the tape is wrapped over the edge of the cyclone's ports and that it overlaps the bolt hole on the cyclone's bottom flange. See instructions and diagram below for more.
In most cases, yes - but the cyclone's efficiency will vary based on whether your vacuum is also turned on.
The Dust Deputy cyclone needs a consistent airflow rate to "spin" the dust out of the airstream; If your tool's fan blower is pushing air in while your vacuum is also sucking air out, this can disrupt the airflow rate and reduce the cyclone's separation performance.
In many cases, the fan blower on tools (such as planers) cannot be turned off. If that is the case for you, try collecting your dust with the vacuum turned off. In doing so you will be creating a positive pressure system as the tool's fan blower pushes air through the Dust Deputy cyclone. This method may not work with every vacuum
Even a small leak can significantly affect the overall separation performance of the cyclone. Here are some common places where leaks may occur:
- Along the lid of the dust bin
- Hose adapter fittings on the cyclone
- Where the cyclone is mounted to the lid
- Along the length of your hose
If you can't audibly pinpoint where the leak might be coming from, one of the simplest ways to check for air leaks is with a smoke test. Kits for this can be found at most local hardware stores (usually near the HVAC sections), but it's simple to make a small DIY version or even use incense sticks at home.
With the shop vacuum turned on, simply carry the smoke-stick along the perimeter of your cyclone system and check for where the smoke is drawn into the cyclone. That will show you where your air leak is.
No. This cyclone is designed for use with light debris such as wood dust. For heavy-duty applications with highly abrasive or smoldering materials, we recommend our steel, Heavy-Duty Dust Deputy kits instead.
The waste bin is not available as a standalone item, but if you are an existing owner of the Dust Deputy then we can readily offer you a replacement for any damaged components. Please contact our service department to order.