Super Dust Deputy XL 6" Cyclone
|Horsepower Rating||3HP - 5HP|
|Airflow Rating||Minimum 850 CFM|
|Inlet Size||6-1/4" O.D.|
|Outlet Size||6-1/4" O.D.|
|Discharge Size||10" O.D.|
|Primary Build Materials||SD Polyethylene|
|Static Resistance Rating||Static Dissipative|
|Height to Center of Inlet||31.1"|
|Contents||Cyclone, Gasket, Lid Hardware|
|Country of Manufacture||United States|
|Warranty Information||1 Year Limited Warranty|
|Applicable Patents||Patent #7,282,074 B1, #7,282,074 C1, and #D703,401|
Standard single-stage or bag-style dust collectors lose suction very quickly as the filter becomes clogged with fine dust. The cyclone uses centrifugal force to separate dust and debris from the incoming airstream, containing it safely away from the collector.This frees up the dust collector to move as much air as physically possible without hindrance. That means less downtime for filter cleaning, continuously high suction, and significantly prolonged filter life.
If your shop has fixed piping that matches the diameter of your dust collector's intake, choose a cyclone that matches that as well. So 6" ducting connected to a dust collector with a 6" inlet should use our 6" XL cyclone. The same applies for 4" ducting runs and our new 4" Deluxe cyclone. If your shop has piping that is smaller than your dust collector's inlet, such as 4" piping with a 6" inlet, then our 5" cyclone can be used to transition between them. You will need reducers to complete your setup. If you have industrial applications, such as collecting hot ash/soot or highly abrasive materials such as blasting powders, you should choose our Steel Super Dust Deputy.
In addition to the cyclone and your dust collector, you will need a reinforced, airtight container to mount it to, as well as flex hose or piping to connect it to your tools and dust collector. Any connections should be sealed using silicone caulk or HVAC foil tape.Shop for Assembly Tools
We do not have any adapters to sewer and drain PVC pipe. We do not recommend using it due to the static charge it creates.
By California law, Oneida Air Systems is required to provide advance notice to customers of potentially hazardous materials included in our products. This requirement is enforced regardless of how much of that material is present in the actual product.
The black, static dissipative resin used to create this cyclone separator contains carbon black, which is a chemical considered as "possibly carcinogenic to humans" (Group 2B) when the chemical is an airborne, particulate form. This form would not be typical of normal use of the cyclone, but the law requires this statement be provided regardless.
In our experience, we've never had a customer "wear out" their super dust deputy cyclone from normal use. The only exceptions are when sucks up materials not rated for the cyclone's construction i.e. don't suck up hot, smoldering materials or high abrasives (rough glass, soda blasts, etc.) with the molded cyclone as those can damage or wear out the material.
With its intended application (e.g. wood dust and debris) you could expect this cyclone to last for years to come, if not longer.
If you have conditioned air in your shop, (Heat or cool) then exhausting outside can be costly. If your building is small and well-sealed, you can interfere with flue exhausts as well. Close neighbors might object. If the Dust Collection system is run intermittently it is generally not a problem. Most buildings have enough leaks and crevices where the aforementioned volume of air does not cause problems. If you have a problem opening or closing an outside door when the DC is running, crack a window slightly. The rule of thumb is for every 500 CFM have at least 1 sq/ft of return air coming back into the shop. A lot of our customers blow exhaust air outside successfully.
The shape and size of your container are completely up to you, so use whatever works best for your shop! A smaller container will need to be emptied more often, so most customers use at least a 17 gallon container with our Super Dust Deputy cyclones. Browse Dust Containers Any container you use must be: Airtight: Any air leaks can significantly reduce your suction and separation performance. We recommend foam gaskets or silicone caulk to provide an airtight seal. Reinforced: Light duty containers, such as typical plastic or aluminum trash bins, are not designed to withstand any suction pressure, and can collapse if used with a dust collector and cyclone.
Our Super Dust Deputy cyclone includes basic hardware and a foam gasket for mounting to your container's lid. We also offer a complete 17 gal. drum kit that can be readily used with any Super Dust Deputy cyclone. If you are supplying your own container, we provide this free downloadable Lid Hole Template for our customers. If you are connecting your cyclone to the dust bin via flex hose, you may also need a 6" Angle Ring Flange.
You will not see a difference in separation or airflow performance with either method. Users can choose either "mounting" method to position the cyclone in a way that works best for their shop.
The main factor you'll want to consider is how you'll be emptying the dust bin once it's full. Connecting the bin with hose allows the drum lid to be removed easier compared to lifting off the cyclone and lid together as a single component. The downside to the hose connection method is that you'll require additional components to purchase and will have more variables to consider when ensuring that the system is sealed airtight.
No. Super Dust Deputy cyclones are designed for use in systems with high airflow volume (above 350 CFM) and low static pressure (below 10" WC). Shop vacuums are the exact opposite of this i.e. they are low airflow (below 250 CFM) but with high air pressure (above 60" WC). For standard vacuums we recommend our regular Dust Deputy kits.
Yes. All of our cyclone separators are designed to be used in conjunction with an air filter as they are only meant to remove the majority of dust and debris - not all of it. Eliminating the filter entirely would allow small, harmful dust back into your shop's air.The exception to this rule is if you have the means to vent your waste air outside of the shop. If you pursue that method be sure to consider the loss of conditioned/heated air, local safety codes, and whether your neighbors will be affected by dust laden air.
We recommend that customers use our MERV 16± HEPA Filter Upgrade Kit as it provides the healthiest return air for your shop, as well as being easily serviceable thanks to its wide spaced pleating and non-stick membrane coating.
No. This cyclone is designed for use with light debris such as wood dust. For heavy-duty applications with highly abrasive or smoldering materials, we recommend our steel, Heavy-Duty Dust Deputy kits instead.
While some customers have found use for our cyclones in food related applications (e.g. farming, coffee roasting, etc.) it is not rated as a food safe material by the FDA. This cyclone should only be used for food waste products and not anything that will re-purposed for later consumption.
If you're looking for any easy way to move your cyclone around the shop, without having to lift and carry it every time, we recommend pairing the cyclone with our Universal Drum Dolly and our Angle Brace Kit (to add extra stability).