Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
4" x 4" x 4" Crimped 90 Deg. Tee Joint
Three-Way Hose Connections
This crimped Tee Joint allows you to easily connect multiple tools to your dust collector. The 90-degree configuration should only be used with high-pressure systems (such as the Supercell) where the sharp restriction will not impede airflow to the dust collector.
Crimped fittings are compatible with raw (uncrimped) standard ducting and flex hose; connecting other crimped or tapered components (e.g. reducers, blast gates, etc.) will require a Female Duct Adapter be installed onto the branch. Additional components should be secured to the branch using hose clamps (for hose connections) or tape and sheet metal screws.
For lower CFM systems, it is recommended that blast gates be installed to close off unused airflow during operation.
SKU | DBT040404 |
---|---|
Length of Ends | 2" (Branch) |
Ductwork Type | Standard |
Connection Type | Male |
Crimp Depth | 1" |
Shape | Round |
Primary Build Materials | Galvanized Steel |
Thickness | 22 Gauge |
Welding | Spot Welded |
Static Resistance Rating | Conductive (Metal) |
Color | Silver |
Width | 6" |
Length | 12" |
Height | 4" |
Actual Weight | 1.19 |
Manufacturer | Oneida Air Systems |
Manufacturer Statement | Made in USA |
Warranty Information | N/A |
Proposition 65 | WARNING: This product may expose you to chemicals, including Nickel (metallic), which is known to the State of California to cause cancer or birth defects or reproductive harm. |
- 4" x 4" x 4" Crimped 90 Deg. Tee Joint$59.95
- 4" Aluminum Blast Gate$23.95
- 4" Spiral Pipe Adapter$12.95
- 4" Turn-Key Hose Clamp$5.95
- 4" Ductwork Wall Hanger Kit$39.95