Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
Heavy-Duty Dust Deputy Cyclone Kits
Save Time & Money On the Toughest Dust Extraction Jobs
Durable and rugged, these cyclone separators are designed for industrial applications handling highly abrasive and hot/smoldering materials. Constructed from heavy-gauge, cold-rolled steel with Oneida Air Systems' iconic yellow powder coat for long lasting durability, rust prevention, and jobsite visibility. With a cyclone separator installed, you can better meet the needs of OSHA's new silica dust safety standard!
Rated to remove up to 99.9% of fine dusts and bulk debris from the incoming airstream, the Heavy Duty (HD) Dust Deputy® cyclone significantly reduces filter clogging and suction loss so you can keep your vacuum working at peak performance! Cyclones are available in multiple sizes and kit variations to meet the need of any job. If you can't find what you're looking for, be sure to contact us to discuss your needs with a qualified dust collection technician.
Ideal for use with nearly ANY industrial application:
- Concrete Grinding & Buffing
- Silica Dust Extraction
- Sand/Soda/Bead Blasting
- Metal Grinding*
- Coffee Roasting
- Hot Ash & Soot Cleanup*
- and much, much more!
Be sure to follow all federal and local fire safety codes and only use vacuums rated for the material you are collecting.
Which Dust Deputy Cyclone Do I Need?
- What type of tool do you use for shop clean-up?
-
- What type of material are you collecting?
-
- Is your application electronically sensitive?
-
- Do you have any small, size constraints for your installation?
-
- Do you need a portable or stationary solution?
-
-
-
- Do you need a portable or stationary solution?
-
- What size is your vacuum's inlet?
-
-
-
- Do you have your own dust container?
-
- What size is your vacuum's inlet?
-
-
-
-
- Do you have your own dust container?
-
-
-
-
- Do you need a portable or stationary solution?
-
-
-
- What type of material are you collecting?
-
- What size is your dust collector's base inlet?
-
- Do you have your own dust container?
-
-
- Recommended for 0.5HP to 3HP Dust Collectors
- 350 Minimum Actual CFM
- Typically used with 4" & 5" Ductwork
-
-
-
- Recommended for 0.5HP to 3HP Dust Collectors
- 350 Minimum Actual CFM
- Typically used with 4" & 5" Ductwork
-
-
- Do you have your own dust container?
-
-
- Recommended for 0.5HP to 3HP Dust Collectors
- 350 Minimum Actual CFM
- Typically used with 4" & 5" Ductwork
- Recommended for 3 to 5HP Dust Collectors
- 850 Minimum Actual CFM
- Typically used with 6" Ductwork
-
-
-
- Recommended for 0.5HP to 3HP Dust Collectors
- 350 Minimum Actual CFM
- Typically used with 4" & 5" Ductwork
-
-
- Do you have your own dust container?
-
-
- Recommended for 0.5HP to 3HP Dust Collectors
- 350 Minimum Actual CFM
- Typically used with 4" & 5" Ductwork
- Recommended for 3 to 5HP Dust Collectors
- 850 Minimum Actual CFM
- Typically used with 6" Ductwork
-
-
-
- Recommended for 0.5HP to 3HP Dust Collectors
- 350 Minimum Actual CFM
- Typically used with 4" & 5" Ductwork
-
-
-
- Recommended for 3 to 5HP Dust Collectors
- 850 Minimum Actual CFM
- Typically used with 6" Ductwork
-
-
-
- Recommended for 0.5HP to 3HP Dust Collectors
- 350 Minimum Actual CFM
- Typically used with 4" & 5" Ductwork
- Recommended for 0.5HP to 3HP Dust Collectors
- 350 Minimum Actual CFM
- Typically used with 4" & 5" Ductwork
- For corrosive and/or food-waste applications.
-
-
-
-
-
- Stainless Steel Dust Deputy DIY Cyclone Pre-SeparatorsAs low as $549.95SKU: AXDSSAvg. Lead Time (Days): 15
-
-
-