JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.

FXK010039

13" x 39" Hanging C-Rated Spunbond Cartridge Filter Retrofit Kit

$449.00

Includes a wide-pleated, spunbond polyester cartridge filter with a total filtration area of 95 sq ft. Filters specially designed for low pressure drop using durable Izumi Axtar spunbond media; 3rd-party tested for filtration efficiency. Rated at 99.9% efficient at 0.3-2.0 microns* (with seasoned filter, more info). Suitable for retrofitting 1-3hp dust collectors . Features a 7" inlet, lightweight molded HDPE fine dust pan, and pre-drilled holes for hanging wires.

Skip to the end of the images gallery

13" x 39" Hanging C-Rated Spunbond Cartridge Filter Retrofit Kit

Skip to the beginning of the images gallery

Overview

Upgrade Your Old Dust Collector's Filter

Replace your dirty cloth bag filter with a compact, high-efficiency spunbond cartridge Filter! When fully seasoned, the filter's Izumi Axtar filter media is rated as 99.9% efficient with particles ranging 0.3 – 2.0 microns* (Learn More). One cartridge can replace the role of multiple filter dust bags and won't clog up after a few cleaning cycles. Can be easily cleaned from the outside by blowing compressed air into the pleats of the unit.

Benefits and Features

95 square feet of filter surface area suitable for 1-3hp dust collection systems
Specially designed for high airflow performance with minimal pressure drop
Wide-spaced pleating facilitates quick dust release for cleaning
Durable polyester pleating material with external, reinforcing steel wire frame
Independently lab tested and verified filtration media
Patented acoustic foam filter silencer reduces noise level by 1-2 dBA
Quick-release fine dust pan molded from lightweight resin
Pre-drilled holes on plenum filter plate for installing hanging straps (not included)
Total Kit Height: 47" (allow 1"-2" extra so that the bin can be emptied)

* The filtration efficiency ranges described here are for a filter that has been fully seasoned over the course of several dust loads and cleanings.

Example installation of the Super Cartridge Filter Retrofit Kit

Specifications

More Information
SKU	FXK010039
Horsepower Rating	1HP - 3HP
Filter Type	Izumi Axtar Spunbond Media
Filtration Efficiency	99.9% at 0.3–2.0 microns* (with seasoned filter, more info)
MERV Rating	MERV 13 ±
Filter End Type	Open/Open
Total Filtration Area	95 sq ft
Primary Build Materials	Galvanized Steel, Static Dissipative Polyethylene, Polyester
Reinforcement	External Wire Cage
Static Resistance Rating	N/A
Color	White
Shape	Cylindrical
Height	47"
Actual Weight	31.3
Contents	Cartridge Filter, Foam Silencer, Dust Bin, Plenum Plate, Hardware
Manufacturer	N/A
Warranty Information	N/A
Proposition 65	WARNING: This product may expose you to chemicals, including Nickel (metallic), which is known to the State of California to cause cancer or birth defects or reproductive harm.

Documents

FAQ

How is the filter cleaned if it doesn't have the typical hand crank?

The use of hand cranks that "beat" the filter can damage the filter's pleating material overtime, so our systems are not built with such mechanisms. Click "Read More" to read about recommended filter cleaning techniques.

How often should I clean the dust collector's cartridge filter?

This can vary widely depending on how often your dust collector is used and what kind of dusts it's exposed to but you should typically clean it only once you've noticed a considerable drop in suction performance. In our experience this can be around once per year, but with heavy amounts of sanding it could be as often as once per month. A meter such as our Filter Efficiency Gauge can also be used to monitor pressure buildup and inform you when the filter needs to be cleaned.

How do I clean this filter?

Clean this filter using compressed air blown from the outside of the filter. Click "Read More" for further instructions.

When should I replace this filter?

With regular maintenance, our cartridge filters can easily last up to 5 years. Your filter should only be replaced if thorough cleanings do not help to restore your suction performance.

Will this retrofit filter affect my airflow?

Yes, it will improve it! This product has a significantly higher filtration surface area compared to cloth bags, which allows a higher volume of air to pass through and reducing pressure buildup.

13" x 39" Hanging C-Rated Spunbond Cartridge Filter Retrofit Kit

Upgrade Your Old Dust Collector's Filter

Benefits and Features

Recommended Articles