SSK550000

C5500 Steel Cyclone Separator

$4,999.00

This heavy-gauge steel cyclone can be used in custom material handling solutions to pre-separate bulk debris and fine dust from the incoming air; prolonging filter life and maintaining high suction. Features full seam-welded construction with powder coat finish for long lasting durability. Rated for use with 15-20HP dust collection fan blower motors.

Commercial Financing

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Overview

Ultra-High Efficiency Cyclonic Separation for Industrial Applications

Our C-Series cyclones are constructed from heavy-gauge steel that is fully seam-welded with an industrial powder coat finish to provide long lasting durability through even the toughest applications. Suitable for use with nearly any type of waste material including wood, drywall, concrete, gravel, clay/silica, bio-waste, and more!

Oneida Air Systems cyclone designs remove up to 99% of bulk debris and fine dust from the incoming airstream, depositing it in an easy-to-empty, customer supplied container below. By placing a cyclonic pre-separator before your fan blower you can vastly improve your shop's efficiency and quality of work!

Maintain continuously high suction by reducing filter clogging and motor strain
Protect your fan blower's impeller from harmful bulk debris
Significantly extend your filter's lifespan - saving you time and money on replacements
Fast and simple waste containment and disposal - no more messy dust clouds
Inlet and outlet ports can be independently rotated to adapt to nearly any shop layout

Specifications

More Information
SKU	SSK550000
Cyclonic Separation Efficiency	Removes over 99% of fine wood dusts
Horsepower Rating	20HP
Airflow Rating	4,000 - 7,000 Actual CFM
Waste Capacity	Customizable
Inlet Size	16" Dia.
Outlet Size	18" Dia.
Discharge Size	14" Dia.
Primary Build Materials	Cold Rolled Steel
Welding	Seam Welded
Static Resistance Rating	Conductive (Metal)
Color	White
Width	36"
Height	83"
Actual Weight	490
Manufacturer	Oneida Air Systems
Manufacturer Statement	Made in USA
Warranty Information	1 Year Limited Warranty
Proposition 65	WARNING: This product may expose you to chemicals, including Nickel (metallic), which is known to the State of California to cause cancer or birth defects or reproductive harm.

FAQ

Can I vent my system outside?

If you have conditioned air in your shop (heated or cooled), then exhausting outside can be costly. If your building is small and well-sealed, you can interfere with flue exhausts as well. Close neighbors might object. If the Dust Collection system is run intermittently it is generally not a problem. Most buildings have enough leaks and crevices where the aforementioned volume of air does not cause problems. If you have a problem opening or closing an outside door when the DC is running, crack a window slightly. The rule of thumb is for every 500 CFM have at least 1 sq/ft of return air coming back into the shop. A lot of our customers blow exhaust air outside successfully.

Can I use this steel cyclone with smoldering or abrasive debris?

Yes, absolutely. This cyclone is built with heavy-gauge, powder coated steel for industrial applications collecting highly abrasive or smoldering materials e.g. hot ash/soot, blasting powders, concrete, grinding dust, etc. Please note that you should also ensure that your vacuum/dust collector is rated to accept these same types of materials i.e. do not collect hot/smoldering materials if your vacuum isn't normally capable of collecting this type of waste.

Is the steel cyclone rust-proof?

In short, no. The steel cyclone has a powder-coat finish, ensuring that it's durable and rust resistant, but if you expect to have your cyclone exposed to water on a regular basis (e.g. exposed to harsh weather, submerged in water, etc.) we recommend you find additional covering to prevent corrosion over time.