Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
5hp 1ph High Vacuum 55 Gal. Freestanding Cyclone Dust Collector
Variable Speed, High-Pressure Dust Collection for CNC Machines
Primarily designed for CNC applications, it uses patented Oneida Air Systems' patented SMART Boost® technology to provide roughly twice the static pressure of standard collectors and pull maximum CFM from the cutter head. This increased suction performance means higher-quality cuts, increased cutter life, and less clean up.
Traditional dust collector fan motors operate at a fixed speed (RPM). When long ducting runs, smaller tool ports, and even closed gates limit the volume of air (CFM) the fan can move at its fixed speed, the motor ends up doing less work – and draws fewer amps. Our unique SMART Boost technology ensures the motor is always working at full capacity (with a constant amp draw) by increasing fan speed as needed to deliver maximum CFM and maximum suction at all times – up to double the CFM and suction of traditional, fixed RPM dust collectors. It’s truly revolutionary!
This high pressure system is ideal for use with any type of CNC cutting tools as well as saws, jointers, lathes, shapers, planers, routers, sanders, and more!
Included Features & Components
- Industrial 5HP U.S. Made Fan Blower Motor
- SMART Boost Variable Speed Airflow Controller
- Wireless Radio Frequency Remote Control Keyfob
- Heavy-Gauge Seam Welded Steel Cyclone Separator
- (2) Internal Silencers
- Magnetic Starter
- Filter Plenum Assembly
- (2) Spunbond Cartridge Filters
- Heavy-Duty Angle Iron Frame Stand
- 55-Gallon Reinforced Steel Dust Bin
- 2 Year Limited Warranty
Continuously High Airflow Performance
Our patented SMART Boost technology directly measures resistance placed on the fan motor and automatically increases the fan's speed to compensate when suction is low, ensuring that the motor always works at peak performance levels! This can double your airflow through smaller or mixed ports - perfect for CNC machines!
- High-efficiency, US-made fan blower motor
- Industrial-grade brushless motor designed for continuous duty
- Wired for three phase power for commercial applications.
- Delivers up to 1,789 Actual CFM at 5.4" S.P. - ample airflow for multiple woodworking tools at once.
- Low pitch noise level provides ideal operator comfort
- System's inlet and outlet rotate independently at 45 degree increments to suit your shop's needs.
Ultra-High Efficiency Steel Cyclone Separator
Features Oneida Air Systems' unique long-tapered cyclone design that provides maximum pre-separation efficiency compared to the squatter cyclone designs of competitors.
- Virtually eliminates filter clogging and suction loss to provide continuous suction performance.
- Significantly extends the lifespan of the filter and reduces downtime needed for cleaning.
- Large 7" dia. neutral-vane inlet for use with 6" ductwork layouts.
- Industrial 16 gauge steel construction with full welded, airtight seams.
- Durable, rust preventative, almond-white powder coat finish.
High Quality & Serviceable Filtration
This system uses spunbond polyester cartridge filters that are specifically designed for dust collection applications - providing unbeatable airflow and filtration performance - and are proudly made in the USA!
- We fully stand by the quality and performance of our filters; each filter is sent to an accredited independent testing lab. Contact us for more information and documentation.
- Wide-spaced pleating and non-stick PTFE membrane coating facilitates quick and easy maintenance.
- Patented filter stacking system provides the filtration area of a single larger filter, but without the cumbersome weight and install, and provides additional savings when replacements are required.
- Patented internal acoustic foam reduces noise caused by vibrating outgoing air by 1–2 dBA
- Fine dust pan captures residual dust that falls off the inside of the filter. Can be removed easily for cleaning after reverse blowing compressed air into the pleats.
SKU | XXK050133 |
---|---|
Horsepower | 5 hp |
Motor Type | U.S. TEFC Motor |
Motor Service Factor | 1.00 |
Voltage | 220-240V |
Recommended Breaker Size | 30A |
Amperage (Typical) | 19.5A |
Phase Option | Single-Phase (Pre-Wired) |
Frequency | 60Hz |
Power Connector Type | 3 Bare Wires |
Power Cord Length | 10 feet |
Impeller Type | Single-piece, backward inclined, non-sparking/non-ferrous, cast aluminum alloy. |
Impeller Size | 16-1/2" Dia. |
Real CFM Rating | 2,150 Actual CFM at 2" S.P. |
Free Fan CFM Rating | 3,225 CFM |
Maximum Suction | 16" WC |
Noise Level | 75-81 dBA @ 10 ft |
Motor Speed Type | Fixed |
Cyclonic Separation Efficiency | Removes over 99% of fine wood dusts |
Filter Type | Izumi Axtar Spunbond Media |
Filtration Efficiency | 99.9% @ 0.2-2.0 microns |
Total Filtration Area | 155 sq ft |
Waste Capacity | 55 Gallons |
Remote Control | Sold Separately |
Remote Control Part # | Item #AXR220000 |
Primary Build Materials | Cold Rolled Steel |
Welding | Seam Welded |
Static Resistance Rating | Conductive (Metal) |
Color | White |
Inlet Size | 8" Dia. |
Outlet Size | Square ID: 10-1/32" (W) x 7-41/64" (H) with 1-1/4" Flange |
Discharge Size | 10" Dia. |
Width | 30" (Stand only) 56" (with Filter) |
Depth | 30" (Stand only) 33-1/4" (with Filter) |
Height | 109-1/2" |
Height to Center of Inlet | 80-1/4" |
Actual Weight | 469 |
Contents | Blower Motor Assembly, Magnetic Starter, Fan Housing, Cyclone Separator, Filter Plenum, 2x Stacking Cartridge Filters, Internal Silencer, Filter Efficiency Gauge, Drum, Stand, Hardware |
Manufacturer | Oneida Air Systems |
Manufacturer Statement | Made in USA |
Warranty Information | 2 Year Limited Warranty |
Certifications | NFPA Compliance Ready (See Reference Guide). cETLus certified to both U.S. and Canadian product safety standards by an NRTL. Conforms to UL-1017 and Can/CSA-C22.2 No. 243 standards. |
Proposition 65 | WARNING: This product may expose you to chemicals, including Nickel (metallic), which is known to the State of California to cause cancer or birth defects or reproductive harm. |