Actual appearance may vary to that shown above.

iVAC Pro Tool Plus Automatic Power Sensor

Automatically detects when your dust producing tool is powered on and sends a wireless RF signal to engage your dust collector. Features 3 programmable sensor modes (Auto, On, Off). Requires an installed iVAC Pro Switch (sold separately).
SKU
ARS000002
$59.95

The World's Finest Automated Dust Control System for your Health, Safety, and Convenience

Tired of having to walk over to your dust collector every time you need it? Wouldn't it be nice if it just started up automatically?

Introducing the iVAC Pro Automated Dust Control System! New to Oneida Air Systems, this unique technology detects when your power tools are in use and automatically turns on the dust collector for you!

  • Complete Automation System - Up to 8 tool sensors can be synced to the same switch, allowing you to automate your entire shop!
  • Robust Wireless Technology - Transmits radio frequency signal to the iVAC Pro Switch from up to 40ft away.
  • Multiple Operating Modes - AUTO setting turn on the dust collector only when the tool is on. ON/OFF modes allow for direct manual control of the collection system.
  • Various Mounting Options - Works on insulated power cords, metal clad cables, and even steel conduits.
  • Custom Sensing Level - Can be set to detect current 0.3amps or greater. Includes handy fine-point adjustment tool

How Does it Work?

The iVAC Pro Tool Sensor works by detecting the magnetic field created by your power tools when they're turned on. The sensor clamps directly onto the tool's power cord and is capable of detecting currents as low as 0.3amps. The iVAC Pro Tool Plus sensor can be used with nearly any tool in your shop including: lathes, planers, jointers, belt sanders, chop/miter saws, and more

Once the sensor has detected that the tool is on, it sends a robust wireless signal to the iVAC switch (sold separately), which then powers on your dust collector.

An iVAC Pro Sensor is required for each tool you with to sync with your dust collector.

Example of an iVAC system


Specifications
Voltage110V
Phase (Pre-Wired)1-Phase
Frequency60Hz
Power ConnectorNEMA 1-15
Power Cord Length10 feet
ColorYellow
Country of ManufactureCanada
Warranty Information1 Year Limited Warranty
CertificationsFCC ID: YCH- IVACTP, IC: 8940A-IVACTP
Write Your Own Review
You're reviewing:iVAC Pro Tool Plus Automatic Power Sensor
Your Rating
Frequently Asked Questions
No Questions
Did you find what you were looking for?

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.