Fiber Drum Kits
Waste container kit for use with cyclonic dust collection systems. Includes lightweight fiberboard drum, lid with collared inlet, lever-locking lid clamp, flexible connection hose, and adjustable hose/band clamps.
110 Gallon version includes two separate, 55 gallon drums and a Pants Wye joint fitting to split waste evenly between the two containers. A specific system stand model or wall mounting bracket will be required for use with these "Splitter Kits" to accommodate their additional height - call 1-800-732-4065 for info.
|Reinforcement||Reinforcing Steel Rings|
|Primary Build Materials||Fiberboard|
|Country of Manufacture||United States|
|Contents||Drum, Collared Lid, Lid Clamp, Hose, 2x Hose Clamps|
|Product Warning||Use only with dry materials and low vacuum pressure systems. Drum may collapse under high vacuum pressures.|
|Height||23" (35 Gallon Model) |
35" (55 Gallon Model)
We apologize for the typo on our website. The heights should now be correct for the 35 and 55 gallon...
Yes. You can find the individual components (drum, clamp, and lids) at oneida-air.com/dust-collectors/system-components/containers/components.
We realize that this can sometimes be tough to fit the hose onto these ports. We have found that the quickest and easiest way is to pull it on using pliers, one side at a time, until the hose is covering the port by 1" to 2". Then use the hose clamps provided with the drum kit to secure the hose in place for good.