Actual appearance may vary to that shown above.

Quick-Clamp Duct Reducers

Ductwork fitting for connecting different sized pipe and hoses. Long-tapered design creates minimal air resistance. Constructed from spot-welded, heavy-gauge galvanized steel. Features rolled ends to accept quick-clamp Gorilla Duct fittings.
In stock
SKU
GRZ
As low as $49.92

Affordable Clamp Together Ductwork – Made In The USA

Easy to Install – NO Rivets, NO Screws, and NO Welding!

Reducers allow you to efficiently reduce the diameter of your ductwork run, typically to connect to systems and tools via flex-hose and/or machine adapters. Oneida Air Systems provides reducers that drop size by 1" or 2" depending on the model selected. This item includes the reducer only; you will require an additional O-ring if you're using this in conjunction with an adjustable sleeve.

These Reducers are constructed from heavy-gauge galvanized steel. The taper is lapped spot-welded and caulked. Features rolled-ends on each opening for use with Quick-Clamp Duct Clamps, allowing for easy adjustments and fast installations. Spend less time measuring, cutting, and assembling your ducting so you can get right to work!

Specifications
Ductwork TypeQuick-Clamp
ShapeRound
Primary Build MaterialsGalvanized Steel
Thickness20-22 Gauge
WeldingLaser Welded
Static Resistance RatingConductive (Metal)
ColorSilver
Country of ManufactureUnited States
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Frequently Asked Questions
Is OAS Quick-Clamp Duct compatible with Nordfab Quick-Fit Ducting?

Yes! As long as the opening pipe diameters are the same, OAS Quick-Clamp Duct components can be combined and used interchangeably with Nordfab® QF ducting and other common clamp-together ductwork products.

What pressures will OAS Quick-Clamp Duct withstand?

Oneida Air Systems' Quick-Clamp Duct will withstand negative pressures in excess of 50 inches negative water pressure. The duct is NOT a high pressure positive duct.

What tools will I need to install Quick-Clamp Duct components?

Besides the standard tape measure, ladders, and any tools that maybe required for attaching hangers, all you'll need to install Quick-Clamp Duct is a saw (preferably a reciprocating/saws-all) to cut the duct for fitting to various lengths. But these are tools required by any ductwork installation. With Oneida Air Systems' Quick-Clamp Duct there's no riveting, no screws, and no welding required.

Will I need to hire a technician to install Quick-Clamp Duct?

No. Whether you're installing the duct yourself or installing for a customer, Oneida Air Systems' Quick-Clamp Duct is simple enough for anyone to use.

Did you find what you were looking for?

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.