Actual appearance may vary to that shown above.

Male Duct Adapters

Crimped on one end for easy flex hose connections. Raw end attaches over blast gate inlet.
SKU
DAB
As low as $7.27

Blast Gate Adapters are short sections of galvanized steel pipe that are crimped on one end and raw on the other.

Attach the adapter to the side of the blast gate that flexible hose will be connected to. The raw end slides over the blast gate and is held in place with either sheet metal screws or pop rivets. You will need to pre-drill the aluminum blast gates. The aluminum gate is tapered and will be smaller than the blast gate adapter. You will need to seal this joint with silicone to make it air-tight.

Blast Gate Adapter Diagram
Specifications
Ductwork TypeStandard
Connection TypeMale / Female
ShapeRound
Primary Build MaterialsGalvanized Steel
WeldingSpot Welded
Static Resistance RatingConductive (Metal)
ColorSilver
Length3"
Country of ManufactureUnited States
Similar Products
Write Your Own Review
You're reviewing:Male Duct Adapters
Your Rating
Frequently Asked Questions
What's the best way to apply foil tape?

We've heard from many customers who've had great success using a simple Wallpaper Roller to smooth out their foil tape, giving a very smooth, clean look on your ducting. The roller helps smooth out air bubbles and crinkled marks while making it easier to get those hard to reach places on hanging ductwork.We do not carry this product but it can be found easily at your local hardware store or home renovation outlet.

Did you find what you were looking for?

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.