Actual appearance may vary to that shown above.

Oneida LP-250 Concrete Dust Extractor

Low-profile portable vacuum designed for use in concrete grinding applications. Features an internal, three-stage cyclonic separation system, pulse filter cleaner, and liner bag retainer. Certified as a Full-Unit HEPA Vacuum that meets the EPA's RRP requirements and OSHA's new silica dust safety standards.

In stock

SKU
XXP250000
Customize Oneida LP-250 Concrete Dust Extractor

* Required

Your Customization
Oneida LP-250 Concrete Dust Extractor (#XXP250000)
Oneida LP-250 Concrete Dust Extractor

In stock

$2,990.00

Summary

    Kit Modification: If you need further customization of your system (e.g. mounting options, waste container upgrades, different filtration, etc.) contact us directly and one of our representatives will work with you to build the system that best meets your shop's needs.

    Specifications
    Horsepower1HP
    Motor TypeAmetek Motor
    Voltage110V
    Recommended Breaker Size15A
    Amperage (Typical)15.5A
    Phase (Pre-Wired)1-Phase
    Frequency60Hz
    Power ConnectorNEMA 5-15
    Power Cord Length20 feet
    Real CFM Rating245 Actual CFM at 23" S.P.
    Maximum Suction70" WC
    Noise Level73 dBA @ 10 ft
    Filter Media TypeCleanStream HEPA
    Filtration Efficiency99.97% @ 0.3 microns
    MERV RatingMERV 16 ±
    Waste Capacity17 Gallon
    PortableYes
    Remote ControlSold Separately
    Primary Build MaterialsCold Rolled Steel, SD Polyethylene
    WeldingSeam Welded
    Static Resistance RatingConductive (Metal)
    ColorYellow
    Country of ManufactureUnited States
    Warranty Information1 Year Limited Warranty
    CertificationsFull-Unit HEPA Vacuum
    ContentsBlower Motor Assembly, Cartridge Filter, Pulse Filter Cleaner, Cyclone Separator, Dust Bin, 5x Liner Bags, Bag Holder System, Hardware
    Inlet Size2-1/4" ID
    2-1/2" OD
    Width20"
    Depth20"
    Height48"
    Height to Center of Inlet36"
    Write Your Own Review
    You're reviewing:Oneida LP-250 Concrete Dust Extractor
    Your Rating
    Frequently Asked Questions
    Can this be used for wet applications as well?

    No. This system is designed for use collecting dry materials only.

    What dust can be collected with your collector?

    Oneida Air Systems' dust collectors are designed and tested for wood and wood dust. They can and have been be used effectively for various other dusts and chips such as drywall dust, paper dust, agricultural dust, metal chips and other forms of debris. The customer is however, cautioned that some common materials when cut, ground or processed by machinery may become very dangerous: highly toxic, flammable, or deflagrable and explosive and they should therefore ensure that you use your particular use of a dust collection system in accordance to national, state, local, NFPA, OSHA and all other applicable codes.

    Did you find what you were looking for?

    Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.