Actual appearance may vary to that shown above.

Quick-Clamp Duct Saddle Tap Wyes

Create new branches on existing duct layouts by installing these galvanized steel joints. New branch is rolled on the end to accept quick-clamp Gorilla Duct fittings. Mounting hardware not included.
SKU
GWT
As low as $136.60
This Item Is Drop Shipped from North Carolina

All Quick-Clamp Ductwork components are drop-shipped from our facility in North Carolina and will arrive in a shipment separate from other product types on your order (if applicable). All other Oneida Air products ship from our headquarters in Syracuse, NY.

Build a New Branch Off of Your Existing Ducting Run

Saddles can be used to install a new quick-clamp ducting branch into existing ductwork without having to disassemble the run. Cut a hole into the existing duct then attach the saddle over the hole. Secure the saddle to the existing duct with sheet metal screws or pop-rivets and seal it in place with silicone.

Specifications
Ductwork TypeQuick-Clamp
ShapeRound
Primary Build MaterialsGalvanized Steel
Thickness22 Gauge
WeldingStitch Welded
Static Resistance RatingConductive (Metal)
ColorSilver
Country of ManufactureUnited States
Write Your Own Review
You're reviewing:Quick-Clamp Duct Saddle Tap Wyes
Your Rating
Frequently Asked Questions
Is OAS Quick-Clamp Duct compatible with Nordfab Quick-Fit Ducting?

Yes! As long as the opening pipe diameters are the same, OAS Quick-Clamp Duct components can be combined and used interchangeably with Nordfab® QF ducting and other common clamp-together ductwork products.

What pressures will OAS Quick-Clamp Duct withstand?

Oneida Air Systems' Quick-Clamp Duct will withstand negative pressures in excess of 50 inches negative water pressure. The duct is NOT a high pressure positive duct.

What tools will I need to install Quick-Clamp Duct components?

Besides the standard tape measure, ladders, and any tools that maybe required for attaching hangers, all you'll need to install Quick-Clamp Duct is a saw (preferably a reciprocating/saws-all) to cut the duct for fitting to various lengths. But these are tools required by any ductwork installation. With Oneida Air Systems' Quick-Clamp Duct there's no riveting, no screws, and no welding required.

Will I need to hire a technician to install Quick-Clamp Duct?

No. Whether you're installing the duct yourself or installing for a customer, Oneida Air Systems' Quick-Clamp Duct is simple enough for anyone to use.

Did you find what you were looking for?

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.