Actual appearance may vary to that shown above.

Industrial 18" x 62" Stacking Spunbond Filters

Modular cartridge filter kit allows for custom sizing of your system's filtration area as well reducing overall replacement costs. Contains two filters specially designed for low pressure drop using durable Izumi Axtar spunbond media; 3rd-party tested for filtration efficiency. Features wide-spaced pleating with non-stick coating for quick and easy cleaning.
SKU
FCK186200
$414.00

Modular Filtration for Industrial Dust Collection Systems

Our patented Stacking Filter System allows for customizable sizing of the total square footage filter area for your dust collection system. Allows for simple and easy adjustments/upgrades to your filter configuration and reducing costs on replacements.

These industrial-grade cartridge filters are excellent for small, flour-sized dust particles such as wood dust. One cartridge can replace the role of multiple filter dust bags and won't clog up after a few cleaning cycles. Can be easily cleaned from the outside by blowing compressed air into the pleats of the unit.

  • Specially designed for high airflow performance with minimal pressure drop
  • Wide-spaced pleating and non-stick coating faciltates quick dust release for cleaning
  • Durable polyester pleating material with external, reinforcing steel wire frame
  • Independently lab tested and verified filtration media

System Compatibility Chart

Description Item #
High Vacuum #XXK050133, #XXK050333, #XXS050333, #XXS050334
Direct Drive Systems #XXK070323, #XXK100300, #XXK150300, #XXK200300

For replacement cartridges see items #FCS183900 and #FCS182000.

Specifications
Horsepower Rating5HP
Filter Media TypeIzumi Axtar Spunbond
Filtration Efficiency99.9% @ 0.2-2.0 microns
MERV RatingMERV 13 ±
Filter End TypeDouble Open Ended
Total Filtration Area155 sq ft
ReinforcementExternal Wire Cage
ShapeCylindrical
Primary Build MaterialsGalvanized Steel, Polyester
Height62"
Inner Diameter12.875"
Outer Diameter18"
ColorWhite
Contents2x Cartridge Filters, Stacking Clips
Country of ManufactureUnited States
Applicable PatentsPatent #9,370,740
Write Your Own Review
You're reviewing:Industrial 18" x 62" Stacking Spunbond Filters
Your Rating
Frequently Asked Questions
How do I clean this filter?

Clean this filter using compressed air blown from the outside of the filter. The nozzle should be angled roughly 20° and pointed into the filter's pleating. Keep the air nozzle at least 6" away from the filter to prevent damage to the filter media. We do not recommend using water to clean this filter.This cartridge filter has a pleating arrangement that is widely spaced for significantly faster and easier cleanings compared to competitive models. Additionally, the filter media is coated with a non-stick PTFE membrane that allows for quick dust release when cleaning.

How often should I clean the filter?

This can vary widely depending on how often your dust collector is used, and what kind of dusts it's exposed to. You should typically clean it only once you've noticed a considerable drop in suction performance. In our experience this can be around 1x per year, but with heavy amounts of sanding it could be as often as 1x per month. A pressure meter such as our Filter Efficiency Gauge can also be used to monitor pressure buildup.

When should I replace this filter?

With regular maintenance, our cartridge filters can easily last up to 5 years. Your filter should only be replaced if thorough cleanings do not help to restore your suction performance.

Did you find what you were looking for?

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.