Actual appearance may vary to that shown above.

Standalone Vortex DCS Floor Sander Cyclone

Significantly boosts the airflow performance of your current dust containment system, allowing for smaller hose diameters, multiple connected tools, longer hose lengths, improved sanding, and more! Retrofits onto most 2.5" floor sander dust pipes.
In stock
SKU
VSKCSZ000B
$749.00

Upgrade Your DCS With Our Revolutionary Sander Cyclone!

Since 1993, Oneida Air Systems' award-winning dust separator cyclones have revolutionized the way contractors and renovators use their wet/dry vacuums. We're excited to announce that we're bringing our proven dust solutions to the floor sanding industry with our new Oneida VortexΠDCS Sander Cyclone!

The 2016 Vortex boosts the airflow of any floor sanding dust containment system by pre-separating airborne dust and debris. It's unique design relieves air pressure at the source, significantly improving the performance of both your floor sander and your DCS vacuum.

Primary Benefits:

  • Improved sanding performance
  • Abrasives stay cooler and last longer
  • Less vacuuming between sandings
  • Air stays cleaner with HEPA filtration
  • Use lighter, smaller diameter hoses
  • Extend your hose lengths farther
  • Run multiple tools at once

Our new Vortex cyclone can be used with nearly any dust containment system including both portable vacuums and large trailer systems. Its compact and lightweight design fits snugly onto standard 2.5" floor sander dust pipes and can be easily rotated for maximum floor visibility.

2016 Oneida Vortex DCS Diagram
Specifications
Waste CapacityCustomizeable
Inlet Size2.25" I.D. with 2.5" Coupler
Discharge Size2" O.D. (Tapered)
Width10.5"
Height29.36"
Primary Build MaterialsSD Polyethylene
Static Resistance RatingStatic Dissipative
ColorBlack
ContentsCyclone, Filter, Hose Coupler, Elbow Adapter, Hardware
Country of ManufactureUnited States
Applicable PatentsPatent #6,833,016 B2
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Frequently Asked Questions
Can I use the Vortex cyclone if my sander doesn't have a dust pipe?

Oneida Air Systems offers retrofit handles for many of the world's most popular floor sanders, including select models by Bona, Clarke, Galaxy, K&T, Lagler, Pallmann, and U-Sand. These heavy-duty steel handles install quickly and easily, converting your older system to accept the Vortex Retrofit Cyclone as well as standard 2" DCS vacuum hoses.

What's wrong with using a standard bag system?

Bag systems fill quickly, clog quickly, and are extremely dusty. The more you sand the worse your air flow. After about 10 minutes of sanding, there is usually a drop in suction due to restricted air flow, which means leaving behind more material on the floor and in the air.Additionally, more dust on the floor means more work for your sander, meaning your abrasives wear away quicker.

Did you find what you were looking for?

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.