Actual appearance may vary to that shown above.

Vortex DCS 10.5" x 9.5" HEPA Cartridge Filter

Compact HEPA filter installs onto the Molded Oneida Vortex DCS cyclone, filtering dirty air generated at the sander to provide a clean, healthy, and high visibility work environment. Features wide-spaced pleating with non-stick coating for quick and easy cleaning. Offers a lower profile design over previous Vortex filter designs and be retrofitted for some older systems with an adapter kit (sold separately).

Affordable & Serviceable Filtration for the Oneida Vortex® DCS

This compact and low-profile cartridge filter is for use with our Molded Vortex DCS Sander Cyclones (#VSKCSZ000B). It offers excellent HEPA air filtration without sacrificing airflow performance thanks to its ample surface area and specially formulated fiber structure.

Unlike competitive units, Oneida Air filters work at peak efficiency right out of the box, require zero pre-loading (seasoning), and can be easily cleaned/serviced. If clogged, simply blow compressed air into the filter's pleating from the outside in. The filter's wide-spaced pleating is coated with a non-stick PTFE membrane that allows for quick dust release.

Filter Media TypeG.E. H12 HEPA
Filtration Efficiency99.97% @ 0.3 microns
MERV RatingMERV 16 ±
Filter End TypeDual-Hole Top
Total Filtration Area16.6 sq ft
Primary Build MaterialsGalvanized Steel, Polyester
ReinforcementExterior Metal Wire Screen
Inner Diameter6.5"
Outer Diameter10.5"
Country of ManufactureUnited States
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Frequently Asked Questions
How often should I clean the dust collector's cartridge filter?

This can vary widely depending on how often your dust collector is used and what kind of dusts it's exposed to but you should typically clean it only once you've noticed a considerable drop in suction performance. In our experience this can be around once per year, but with heavy amounts of sanding it could be as often as once per month.

A meter such as our Filter Efficiency Gauge can also be used to monitor pressure buildup and inform you when the filter need's to be cleaned.

How do I clean this filter?

Clean this filter using compressed air blown from the outside of the filter. The nozzle should be angled roughly 20° and pointed into the filter's pleating. Keep the air nozzle at least 6" away from the filter to prevent damage to the filter media. We do not recommend using water to clean this filter.This cartridge filter has a pleating arrangement that is widely spaced for significantly faster and easier cleanings compared to competitive models. Additionally, the filter media is coated with a non-stick PTFE membrane that allows for quick dust release when cleaning.

When should I replace this filter?

With regular maintenance, our cartridge filters can easily last up to 5 years. Your filter should only be replaced if thorough cleanings do not help to restore your suction performance.

  California Residents: Please visit for information regarding Proposition 65 for our products.

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.