Actual appearance may vary to that shown above.

HVAC Aluminum Foil Acrylic Tape - 150' Roll

A general purpose aluminum foil tape with high tack pressure-sensitive rubber based adhesive. For seaming and sealing fiberglass duct board and duct wrap to enhance appearance and maintain vapor barrier integrity.
SKU
ATF000000
$19.38

This HVAC Aluminum Foil Acrylic Tape is engineered with an aggressive, long lasting, pressure-sensitive adhesive that demonstrates superior bonding when exposed to both sub-zero and elevated temperatures. The shiny, UV resistant foil backing offers an enhanced appearance, excellent reflective and flame retardant properties, and remains flexible to resist cracking and lifting around irregular or curved surfaces.

When installing duct work, aluminum foil tape is used to seal a joint between two pieces of pipe after the pipe has been fastened with sheet metal screws or pop rivets. You may need to use Silicone Caulk as well to ensure that the seal is air-tight. Please ask an associate for further details.

  • Superior Bonding: Engineered with an aggressive, long lasting, pressure-sensitive adhesive that demonstrates superior bonding when exposed to both sub-zero and elevated temperatures.
  • Flame Retardant: The shiny, UV resistant foil backing offers an enhanced appearance, excellent reflective and flame retardant properties.
  • High Shear Adhesion: Flexible to resist cracking and lifting around irregular or curved surfaces.
  • Code Compliant: UL-listed tape meet building and construction codes and help increase efficiency by minimizing air distribution loss.
Specifications
Primary Build MaterialsAluminum
ThicknessFoil Backing: 2.0 Mil
Total: 3.6 Mil
ColorSilver
Width2"
Length50 yards
Country of ManufactureCanada
Similar Products
Write Your Own Review
You're reviewing:HVAC Aluminum Foil Acrylic Tape - 150' Roll
Your Rating
Frequently Asked Questions
What's the best way to apply foil tape?

We've heard from many customers who've had great success using a simple Wallpaper Roller to smooth out their foil tape, giving a very smooth, clean look on your ducting. The roller helps smooth out air bubbles and crinkled marks while making it easier to get those hard to reach places on hanging ductwork.We do not carry this product but it can be found easily at your local hardware store or home renovation outlet.

Did you find what you were looking for?

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.