Actual appearance may vary to that shown above.

8" LR Adjustable Elbow

Made from separate gores (independently rotating sections) that adjust to form angles ranging from 0 to 90 degrees. The elbow is pre-crimped on one end for simple installation into existing piping.

This ductwork elbow is manufactured from heavy-duty galvanized steel as separate, independently rotating sections (called gores). This allows the elbow fitting to be adjusted to form any angle from 0 to 90 degrees. This fitting's large radius construction minimizes air resistance, making it ideal for dust collection applications.

The elbow is crimped on one end and raw (uncrimped) on the other to simplify installation into existing 8" I.D. ductwork. Crimps should be pointed in the direction of the airflow (i.e. towards the dust collector) for optimal performance.

Please Note: Be sure to wear protective work gloves when handling sheet metal ducting as the edges can be very sharp.

Radial Size (R)Adjustable (0-90 Degree)
Center Line Radius14.00"
Ductwork TypeStandard
Connection TypeMale / Female
Crimp Depth1.25"
Primary Build MaterialsGalvanized Steel
Thickness24 Gauge
WeldingSpot Welded
Static Resistance RatingConductive (Metal)
Product Weight3.60
Country of ManufactureUnited States
Write Your Own Review
You're reviewing:8" LR Adjustable Elbow
Your Rating
Frequently Asked Questions
No Questions
Did you find what you were looking for?

Oneida Air Systems (OAS) is not responsible for typographical errors, omissions, or other clerical errors that may occur and makes every effort to provide the most detailed and accurate information available regarding our products. If you encounter incorrect information, please contact us. OAS reserves the right to restrict quantities and correct prices when necessary.