Skip to the beginning of the images gallery

XXK10

10hp Direct Drive Industrial Cyclone Dust Collector

Only %1 left

As low as $11,490.00

Industrial dust collection system for large commercial shops - suitable for collecting from multiple 4"-6" dust ports simultaneously. Includes modular spunbond stacking filter system with efficiency gauge to alert the operator for cleaning. Full-welded, steel cyclone separator captures and removes fine dust and bulk debris from the airstream to provide continuously high suction power and reduce filter maintenance downtime. Custom choice of voltage (230V, 460V) and waste disposal configuration (55 gal., 110 gal., Air Lock, etc.).

Overview

Realize the Power of American Manufacturing

Our 10HP Direct Drive system provides powerful airflow within a compact, quiet, and cost-effective package. With its high-efficiency cyclone separator you can expect continuously high suction performance and minimal filter maintenance.

Made in the USA with long lasting heavy-gauge steel components, our 10HP is ideal for fixed ductwork where 3-5 tools are in use simultaneously. With its typical operating range delivering 3"-11" of static pressure (see fan curve) this system is particularly suited for CNC equipment requiring multiple open ports as well as other high pressure applications.

Included Features & Components

Industrial 10HP U.S. Made Motor
Integral Fan Blower with Carbon Steel Impeller
Magnetic Starter w/ Overload Protector
Heavy-Gauge Solid Welded Steel Cyclone Separator*
High-Efficiency Modular Cartridge Filters
Real-Time Filter Efficiency Gauge
Internal Foam Silencer
Robust Angle Iron Frame Stand
55-Gallon Reinforced Steel Dust Bin (single or dual) or Air Lock
2 Year Limited Warranty
cETLus Certified and NFPA Compliance Ready

* Air Lock models include a clean-out access door on the cyclone for easier maintenance.

Customer Installation Photos

10hp Direct Drive shown with expansion chamber, rotary air lock valve, and transfer blower.

10HP Direct Drive shown with dual 55-gallon dust bins and stacking sound filters

10hp Direct Drive shown with rotary air lock valve, and transfer blower.

10HP Direct Drive shown with dual 55-gallon dust bins and spiral ductwork

10HP Direct Drive shown with single 55-gallon dust bin

10HP Direct Drive shown with single 55-gallon dust bin

10HP Direct Drive shown in external enclosure with dual 55-gallon dust bins. Old stand and filter models shown

10HP Direct Drive shown with single 55-gallon dust bin

Oneida Air Systems' dust collectors are designed and tested for woodworking applications. While they can also be functional for other applications and materials, customers that use our collectors – in all cases, even with wood dust – must do so with the understanding that they take responsibility to ensure proper safety and compliance within their facility and that they follow prescribed Federal, State, Local, OSHA, NFPA, and any other applicable codes or regulations relating to the materials they are collecting. If unsure, customers should consult with their local experts and Authorities Having Jurisdiction (AHJ). We strongly recommend reviewing this product's Owner's Manual and our Product Safety Webpage for more information prior to ordering.

10HP Direct Drive System Fan Performance Curve — Oneida Air uses Actual CFM Ratings that reflect real-world airflow performance.

Continuously High Airflow Performance

Your dust collector should perform at peak efficiency at all times to ensure the health, safety, and quality of your work. That's why Oneida Air Systems uses only the highest quality motors with our dust collection systems. Far superior to the cheap, foreign imported motors used by other manufacturers, our industrial-grade motors are built to last a lifetime.

High-efficiency fan blower motor - Made in USA.
Industrial-grade brushless motor designed for continuous duty.
Wired for three phase power for commercial applications.
Includes grease fittings for easy maintenance or can be taken to local U.S. service centers.
Delivers up to 3,800 Actual CFM at 2.3" S.P. - ample airflow for multiple woodworking tools at once.
Low pitch noise level provides ideal operator comfort.
System's inlet and outlet rotate independently in 45 degree increments to suit your shop's needs.
Heavy-gauge steel fan housing, full-seam welded, built to last a lifetime.

Closeup of Direct Drive cyclone — Clean-out cones and expansion chambers available - call for details.

Ultra-High Efficiency Steel Cyclone Separator

Features Oneida Air Systems' unique long-tapered cyclone design to provide maximum pre-separation efficiency compared to competitors' squatter cyclone designs.

Virtually eliminates filter clogging and suction loss to provide continuous suction performance.
Significantly extends the lifespan of the filter and reduces downtime needed for cleaning.
Rectangular, neutral-vane inlet with 12" dia. square to round adapter.
Industrial 16 gauge steel construction with full welded, airtight seams.
Durable, rust preventative, almond-white powder coat finish.
Air Lock models: Fitted with clean-out access door for easier maintenance.

Triple Cartridge Filter Plenum Kit — Higher filtration efficiency units available by phone order only.

High Quality & Serviceable Filtration

Our industrial Direct Drive systems use spunbond polyester cartridge filters that are specifically designed for dust collection applications (providing unbeatable airflow and filtration performance) and are proudly made in the USA!

We stand by the quality and performance of our filters; Each filter is sent to an accredited independent testing lab. Contact us for more information and documentation.
When fully seasoned, the spunbond filter media is rated as 99.9% efficient with particles ranging 0.3 – 2.0 microns* in size (Learn More)
Wide-spaced pleating resists clogging and facilitates quick and easy maintenance.
Patented filter stacking system provides the filtration area of a single larger filter without the cumbersome weight and install, and provides additional savings when replacements are required.
Patented internal acoustic foam reduces noise caused by vibrating outgoing air by 1–2 dBa.
Fine dust pan captures residual dust that falls off the inside of the filter. Can be removed easily for cleaning after reverse blowing compressed air into the pleats.
Includes Filter Efficiency Performance Gauge that takes the guesswork out of filter maintenance.

* The filtration efficiency ranges described here are for a filter that has been fully seasoned over the course of several dust loads and cleanings.

Rotary Air Lock Feeder Valve Option

Dual 55-Gallon Steel Drum Splitter Kit Option

Single 55-Gallon Steel Drum Kit Option

Configurable Waste Containment Systems

Whether your system is connected to just a few saws, drum sanders, or industrial CNC equipment, Oneida Air Systems recognizes that the amount of waste produced by shops can vary significantly; We offer a wide variety of waste handling accessories to suit the needs of any work environment. All options are mounted to a highly durable, angle iron stand with a rust-preventative, powder coat finish.

System Options:

Air Lock Model: Ideal for shops with large amounts of waste production and provides the most cost effective and convenient disposal option. The dust collector can operate continuously while dust and debris is automatically fed to the container below, eliminating downtime for emptying. The customer must supply their own waste container for the system.
Dual Drum Model: Ideal for any shops with varying quantities of waste production. Waste is deposited evenly between both 55 gal. drums, doubling the time needed between emptying. The system must be powered down to empty either drum.
Single Drum Model: Ideal for smaller commercial shops with a strict height restriction or limited waste production. Expect to empty the single 55 gal. drum much more frequently if used with a large planer, drum sander, or CNC machine.

Specs

More Information
SKU	XXK10
Horsepower	10 hp
Motor Type	U.S. TEFC Motor
Motor Service Factor	1.15
Voltage	208-230V, 460V
Recommended Breaker Size	Call for Info
Amperage (Typical)	26.2 - 23.8A 12.1A @ 460V
Motor FLA	26.2 - 23.8A / 12.1A
Phase Option	Three-Phase (Pre-Wired)
Frequency	60Hz
Power Connector Type	4 Bare Wires
Impeller Type	Backward inclined, welded carbon steel
Impeller Size	17" Dia.
Real CFM Rating	3,800 Actual CFM at 2.3" S.P.
Noise Level	84-85 dBA @ 10 ft
Motor Speed Type	Fixed
Cyclonic Separation Efficiency	Removes over 99% of fine wood dusts
Filter Type	Izumi Axtar Spunbond Media
Filtration Efficiency	99.9% at 0.3–2.0 microns* (with seasoned filter, more info)
Total Filtration Area	465 sq ft
Replacement Filter	#FCK186200
Waste Capacity	Customizable
Remote Control Part #	For 208-230V: Item #AKR220003 N/A for 460V
Primary Build Materials	Cold Rolled Steel
Welding	Seam Welded
Static Resistance Rating	Conductive (Metal)
Color	White
Inlet Size	Round: 12" I.D. Square ID: 8"(W) x 14"(H) Square OD: 10-1/2"(W) x 16-1/2"(H)
Outlet Size	Square ID: 12-1/2"(W) x 10"(H)
Discharge Size	10" Dia.
Width	122" (Total) 64-5/8" (Footprint)
Depth	54" (Total) 38" (Footprint)
Height	135" (at Position 1) 145" (at Position 2) 159" (at Position 3)
Height to Center of Inlet	103" (at Position 1) 113" (at Position 2) 127" (at Position 3)
Contents	Blower Motor Assembly, Magnetic Starter, Fan Housing, Cyclone Separator, Square-to-Round Inlet Adapter, Filter Plenum, 6x Modular Cartridge Filters, Filter Efficiency Gauge, Angle Iron Stand, Hardware. Choice of Drum, Dual Drum, or Air Lock Valve.
Manufacturer	Oneida Air Systems
Manufacturer Statement	Made in USA
Warranty Information	2 Year Limited Warranty
Certifications	NFPA Compliance Ready (See Reference Guide). cETLus certified to both U.S. and Canadian product safety standards by an NRTL. Conforms to UL-1017 and Can/CSA-C22.2 No. 243 standards.
Proposition 65	WARNING: This product may expose you to chemicals, including Nickel (metallic), which is known to the State of California to cause cancer or birth defects or reproductive harm.

Documents

FAQ

How often should I clean the dust collector's cartridge filter?

This can vary widely depending on how often your dust collector is used and what kind of dusts it's exposed to but you should typically clean it only once you've noticed a considerable drop in suction performance. In our experience this can be around once per year, but with heavy amounts of sanding it could be as often as once per month. A meter such as our Filter Efficiency Gauge can also be used to monitor pressure buildup and inform you when the filter needs to be cleaned.

Can the unit sit outside in the weather?

With additional measures in place, it is possible to install these systems outside. Click "Read More" for more information.

What do I need to know about NFPA regulations?

Fire protection regulations are a complex and ever-changing set of rules that differ from facility to facility. However, all of Oneida Air Systems' dust collector are NFPA Compliance Ready and we provide best practices and guidance for assisting customers - read our NFPA Reference Guide for more information.

Is this product compatible with Quick-Clamp Duct?

Yes but you will first need to install a Machine Adapter into the dust collector's inlet. These adapters are smaller on the raw end than traditional ducting so that they can slip into the ports on systems and tools i.e. a 5" Quick-Clamp Duct Machine Adapter will measure ~4.9" O.D. on the raw end.

What dust can be collected with your collector?

Oneida Air Systems' dust collectors are designed and tested for wood and wood dust. They can and have been used effectively for various other debris, including drywall dust, paper dust, agricultural dust, and metal chips. Please note that some common materials when cut, ground or processed by machinery may become highly toxic, flammable, or deflagrable and explosive. Customers must ensure that their particular use of a dust collection system is in accordance with national, state, local, NFPA, OSHA and all other applicable codes.

Can I vent my system outside?

If you have conditioned air in your shop (heated or cooled), then exhausting outside can be costly. If your building is small and well-sealed, you can interfere with flue exhausts as well. Close neighbors might object. If the Dust Collection system is run intermittently it is generally not a problem. Most buildings have enough leaks and crevices where the aforementioned volume of air does not cause problems. If you have a problem opening or closing an outside door when the DC is running, crack a window slightly. The rule of thumb is for every 500 CFM have at least 1 sq/ft of return air coming back into the shop. A lot of our customers blow exhaust air outside successfully.

Can this be used for wet applications as well?

No. This system is designed for use collecting dry materials only.

How do I troubleshoot an air leak with my cyclone?

Even a small leak can significantly affect the overall separation performance of the cyclone. If you can't audibly pinpoint where the leak might be coming from, one of the simplest ways to check for air leaks is with a smoke test. Click "Read More" for further instructions and tips.

My filter gauge is reading 3 and I just installed it onto a new filter - Why is that?

The actual number doesn't really matter. It will be higher when you have more gates open, more airflow through the system and thus more back-pressure on the filter. Click "Read More" for full instructions on how to read your gauge.

What are the dimensions for this product?

General system dimensions are shown in the Specifications tab on each product page. More detailed information can be found in the product's Owner's Manual, located under the Documents tab.

This Items Ships Freight Via Common Carrier

Due its large size and weight, this product must be shipped by freight carrier. Additional fees required for residential addresses and remote, isolated destinations. Our service department will call you after your order has been booked to bill the additional freight fees. You can contact us prior to ordering for a free freight quote.

Learn More

10hp Direct Drive Industrial Cyclone Dust Collector

Realize the Power of American Manufacturing

Included Features & Components

Customer Installation Photos

Continuously High Airflow Performance

Ultra-High Efficiency Steel Cyclone Separator

High Quality & Serviceable Filtration

Configurable Waste Containment Systems

This Items Ships Freight Via Common Carrier

Custom Configurations Available