Quick-Clean Filter Shake Motor and Controller Assembly

Skip to the beginning of the images gallery

FMV181111

18" Quick-Clean Filter Shaker

Name: 18" Quick-Clean Filter Shaker
Brand: Oneida Air Systems
SKU: FMV181111
Price: 349.00 USD
Availability: InStock

$349.00

Significantly extends the interval between filter cleanings by providing a quick and simple way to periodically remove filter cake without disassembling the system. Operates on a manual time dial of up to 5 minute cleaning cycles. Designed for commercial applications with repeatedly heavy dust loads. Compatible with any systems utilizing our 18" pleated cartridge filters.

Overview

Shake the Cake Away in Minutes

Ideal for commercial applications with heavy and continuous dust loads, the Quick-Clean Filter Shaker is a simple and convenient attachment that significantly extends the time interval required between full filter maintenance. This saves your shop valuable time and labor while also ensuring that the dust collector continues to operate at peak efficiency.

Simply turn the dial to the desired cleaning cycle and the Filter Shaker will securely vibrate the filter in place – loosening any layer of fine dust (e.g. filter cake) that's bypassed the cyclone and built up within the filter. Loose dust then falls into the Dust Bin beneath the filter for collection and disposal.

Choose a cleaning interval of 1–5 minutes long depending on your dust load.
Operated manually via a time-dial control box mounted up to 6.5-feet away from the filter.
Install in minutes onto any system with an 18" external cartridge filter (e.g. Dust Gorilla® Pro, High Vacuum, Direct Drive, etc.).
40 Watt vibrating motor runs off convenient 110V power.
Mounts securely to the base of the filter using a heavy-gauge steel plate.
Dust collectors with multiple filter stacks will require multiple filter shakers.

Quick-Clean Filter Shaker Installed on a Dust Gorilla Pro Dust Collector's 18 inch Cartridge Filter — Example installation on a Dust Gorilla Pro dust collector's filter.

Specs

More Information
SKU	FMV181111
Horsepower	40 Watts
Voltage	110-120V
Recommended Breaker Size	10A
Amperage (Typical)	0.5A
Phase Option	Single-Phase (Pre-Wired)
Frequency	60Hz
Power Connector Type	NEMA 5-15
Power Cord Length	20' (from Control Box)
Noise Level	81 dBA @ 10'
Static Resistance Rating	Conductive (Metal)
Color	Orange
Width	22-1/2"
Length	18-1/2"
Height	6"
Contents	Vibrating Motor, Control Box, Filter Mounting Plate, Hardware
Manufacturer	Oneida Air Systems
Warranty Information	90 Day Limited Warranty
Proposition 65	WARNING: This product may expose you to chemicals, including Nickel (metallic), which is known to the State of California to cause cancer or birth defects or reproductive harm.